Hitachi PJ-TX200 User'S Manual And Operating Manual Download Page 74

Page: 74 / 82

ENGLISH

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking

Red

Lit In

Red

Turned

off

Blinking

Red

The cooling fan is not operating.

Please turn the power off, and allow the projector to cool

down for at least 20 minutes. After the projector has

cooled down sufficiently, please confirm the following

items, and then turn the power on again.

• Are any foreign objects caught in the fan?

• Are there any magnetic objects on or near the projector?

Please ensure that installation configuration/usage of

the projector does not allow any foreign materials to be

caught, or disrupt the rotation of the cooling fans.

Blinking

Red

Lit In

Red

Turned

off

Lit In

Red

There is a possibility that the interior of the projector

has overheated.

Please turn the power off, and allow the projector to cool

down for at least 20 minutes. After the projector has

cooled down sufficiently, please confirm the following

items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air filter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after trying the

solutions above, please set the FAN SPEED of the

SERVICE item in the OPTION menu to HIGH (



Lit In

Green

Alternative

blinking

Red

There is a possibility that the interior of the projector

has become too cool.

Please use the projector within the usage temperature

parameters (5°C to 35°C). After applying the solution set

the power switch to ON.

Lit In

Green

Simultaneously

blinking in

Red

It is time to clean the air filter.

Please turn the power off immediately, and clean or

change the air filter referring to the “Air Filter” (



)

section. After cleaning or changing the air filter, please be

sure to reset the filter timer. After applying the solution set

the power switch to ON.

Troubleshooting

Regarding the indicator lamps (continued)

• When the interior of the projector overheats, the power source is

automatically turned off for safety purposes, and the indicator lamps may also
be turned off. If this occurs, set the power switch to the “



” (OFF) position, and

wait at least 45 minutes. After the projector has cooled down sufficiently, please
confirm that the lamp and lamp cover are properly fastened, and then turn the
power on again.

NOTE

Summary of Contents for PJ-TX200



















































































Search results

Summary of Contents for PJ-TX200

Reviews:

Related manuals for PJ-TX200

Brands by name

Popular brands

Hitachi PJ-TX200, User'S Manual And Operating Manual

Search results

Summary of Contents for PJ-TX200

Reviews:

Related manuals for PJ-TX200

Brands by name

Popular brands