Hitachi PJ-TX200 User Manual Download

Page: 32 / 83

Make sure that the power cord is ﬁrmly and correctly connected to both the

projector and power outlet.

Open the lens cover, and set the power switch to

the ON position.

The power indicator will light a steady orange. Then

wait several seconds because buttons may not

function for the ﬁrst several seconds the projector

is turned on.

Press the STANDBY/ON button on the projector or

the POWER button on the remote control.

The projector lamp will light up and the POWER

indicator will begin blinking in green. When the

power is completely on, the indicator will stop

blinking and light a steady green.

Projection

Turning the power on

► When the power is on, a strong light is emitted. Do not look

into the projector lens or openings.

WARNING

• Turn the power on in the correct order. Turn on the projector before

the connected devices.

NOTE

STANDBY/ON button

POWER button

POWER indicator

POWER

LIGHT

BLACK

ASPECT

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

HDMI

AUTO

COMPO

S-VIDEO

VIDEO

POWER

ENTER

LAMP

TEMP

STANDBY/ON

INPUT

RESET

POWER

( Steady orange)

POWER

（

Blinking in green

）

POWER

（

Steady green

）

Summary of Contents for PJ-TX200




















































































Search results

Summary of Contents for PJ-TX200

Reviews:

Related manuals for PJ-TX200

Brands by name

Popular brands

Hitachi PJ-TX200, User Manual

Search results

Summary of Contents for PJ-TX200

Reviews:

Related manuals for PJ-TX200

Brands by name

Popular brands