background image

IMPORTANT SAFETY NOTICE

Proper service and repair is important to the safe, reliable operation of all Philips Consumer Electronics Company** Equipment.
The service procedures recommended by Philips and described in this service manual are effective methods of performing
service operations. Some of these service operations require the use of tools specially designed for the purpose. The special
tools should be used when and as recommended.

It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in order to
minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the
equipment. It also is important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. Philips could not
possibly know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible
hazardous consequences of each way. Consequently, Philips has not undertaken any such broad evaluation. Accordingly, a
servicer who uses a service procedure or tool which is not recommended by Philips must first satisfy himself thoroughly that
neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected.

**

Hereafter throughout this manual, Philips Consumer Electronics Company will be referred to as Philips.

WARNING

Critical components having special safety characteristics are identified with an

!

by the Ref. No. in the parts list

and enclosed within a broken line* (where several critical components are grouped in one area) along with the

safety symbol

!

on the schematics or exploded views.

Use of substitute replacement parts which do not have the same specified safety characteristics may create shock,

fire, or other hazards.

Under no circumstances should the original design be modified or altered without written permission from Philips.

Philips assumes no liability, express or implied, arising out of any unauthorized modification of design. Servicer

assumes all liability.

* Broken Line

Contents

Page

1.

Safety guidelines

1-1

2.

Specifications

2-1

3.

Warnings & Notes

3-1

4.

Mechanical instructions

4-1

5.

Block diagrams, Wiring diagram & Oscillograms

5-1

6.

Diagrams & PWB layouts

6-1

7.

Directions for use

7-1

8.

Alignments

8-1

9.

Parts lists

9-1

Portable LCD projector

LC4043

/17/40

Hopper XG20

PCS 92 687 GB

Published by Consumer Electronics    Printed in The Netherlands

©

Copyright reserved    Subject to modification

g

3122 435 40160

1.

Safety guidelines

1-1

LC4043

PCS 92 688 GB

Summary of Contents for LC4043







Reviews: