52
With this feature, you can watch different channels simultaneously on one screen.
There are two types (Split and PinP) in 2-Picture mode.
AV1
5
A
B
TV
AV
[Split]
FEATURES (continued)
Multi Picture Mode
[PinP]
1.
To activate Multi Picture mode, press
button on the remote control.
Audio is output from the selected picture with a yellow frame.
You can switch the Input modes (DTT, TV, AV1~5, and HDMI1~2) or change
channels only on the side with a yellow frame.
2.
To select the active picture, press
◄►
button.
The yellow frame is shifted from A to B back-and-forth.
3.
To change the channel on the selected picture, press
button.
4.
To change the input mode on the selected picture, press
button on the
remote control.
NOTE
In DTT or TV mode, you cannot select the same input channels on both
sides simultaneously.
You cannot select the same AV input on both sides simultaneously.
You cannot select HDMI input on both sides.
5.
Only when the 1080i or 1080p signal is received on the Main-screen (left screen),
PinP mode is available.
To switch to PinP mode, press
button. Each time
button is pressed,
the picture mode is changed as below.
2-Picture (Split)
2-Picture (PinP)
To select the active picture, press
◄►
button.
When the selected picture is the small screen (Sub-screen) in PinP mode,
the frame of the sub-screen is shown in yellow.
When the selected picture is the large screen (Main-screen) in PinP mode,
there is no yellow frame shown on Main-screen.
To change the position of the sub-screen in PinP mode, press
button.
The position is changed as shown in the fi gure on the right.
6.
To exit from the Multi Picture mode, press
or
button.
Next time you press
button to activate the Multi Picture mode, it will start
from Split mode.
(Main-screen)
(Sub-
screen)