Hitachi P42T01E, User Manual

Page: 22 / 71

21
ENGLISH
BASIC OPERATION
Power On/Off
Now, turn On the main power to the unit. Make sure that the Power Cord is
plugged into the wall socket.
To turn On the power of the unit:
1. Press the Main Power switch on the unit.
The Indicating Lamp will illuminates in Red (Standby mode).
2. Press Sub Power button either on the control panel or on the remote control.
• The colour of the Indicating Lamp turns into Blue , and the image will display
on the screen.
To turn Off the power of the unit:
1. Press Sub Power button either on the control panel or on the remote control.
• The image disappears from the screen and the Indicating Lamp turns into
Red (Standby mode).
2. Press Main Power switch to completely turn Off the power of the unit.
The Indicating Lamp Status Check
Indicating Lamp
Status
Power Status Power Switch Status View Timer Status
Off Off Main power ĺ Off —
Red Standby mode
Main power
ĺ
On
Sub power
ĺ
Off
—
Blue *1 On
Main power
ĺ
On
Sub power
ĺ
On
—
Pulsing Blue Power Save mode *2
Main power
ĺ
On
Sub power
ĺ
On
—
Orange *3 — —
Whilst TV has View Timer
set up.
Green — —
Whilst operating a
programme which has set
up View Timer.
*1 After turning on, the indicating lamp pulses for an instant and then starts lighting. Also, the indicating lamp blinks
whilst using remote control.
In case you do not want it to pulse/blink, select “
Off ” in “ LED Mode ” from Confi guration menu. Refer to
30
for
the details.
*2 About Power Save mode, see “Power Save Mode” and “When Following Messages Appear on the Screen” on
61
and
63
for details.
*3 The indicating lamp blinks in orange if the View Timer setting does not have time information.
NOTE
• If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on
63
~
65
.
It may help you to solve the problems.
• After turning On, it takes a few seconds until TV is started up. If select “
On ” in “ Quick Start Options ” from
Confi guration menu, you can shorten the processing time. Refer to 30 .
• You can turn ON the power only by pressing the Sub Power button during the Standby mode.
• Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
• To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you
leave if there is a power cut during use of the unit.
Sub Power button
Sub Power
button
Main Power
switch
(located on the
bottom surface)