31
Using the Washing Water Again
再次使用洗衣劑
How to use the "Preset" button (Switched options)
ㅷዮྈ⸹᱿͐ᮢᅞᘍņӡဘҙૌŇ
Ș
The preset function allows the finishing time to be set to 6 hours or 9 hours later. This feature comes in handy when you
wish to do the washing while you are out or when you wish to do the washing at night and hang out in the morning.
ר૽ᘺ⠥રໞᆹ⿵⥑હ߱
6
ଅᆹര
9
ଅᆹരŊ߱कӛᆹⳖ⠗ᘺ⠥Ŋ߱ङ⿵ᘺ⠥ᅽᇏᇟሣŊӴᮢԼ⋱ᆯᯍ͵Ӵ᱿ȯ
Ș
Press the "Preset"
button to set the washing content.
ྈʁㅷዮྈ⸹Ŋ⥑હᘺ⠥ҙૌȯ
6 hours later (Light)
6
ଅᆹര
(
㔄ˌ
)
9 hours later (Light)
9
ଅᆹര
(
㔄ˌ
)
No setup (Darken)
ᤀ⥑હ
(
᤹ᝥ
)
In case of the following cases
߱˫ʁᗼʁ
■
Fix the preset duration: press the "Preset" button
.
(With the button pressing and holding, the preset duration will
be displayed)
確認預校內容：按下
按鈕。
(
持續按下期間，顯示預校內容
)
■
Cancel the preset duration: switch off the power
“
On/Off
”
button
.
取消預校內容：切斷電源開關
。
■
Change the preset duration: switch off the power
“
On/Off
”
button
, and reset.
更改預校內容：切斷電源開關
後，重新設定。
Attention
ᘜา
•
In predefi ned operation, do not mix the clothes liable to discol-
oration.
預校運轉時，請勿將容易脫色的衣物混在一起洗滌。
• With the power unplugged or cut, the preset program will be
canceled.
拔掉電源插頭或停電時，預校程序將被取消。
• The washing time varies with the change of the load and tex-
ture of the washings and the volume of the charged water.
洗衣時間隨洗衣量和質地及供水量的變化而改變。
• To prevent the laundry from corrugating, take it out for drying
as early as possible after the end of washing.
為防止衣物起皺，洗衣結束後應盡早取出晾乾。
Use the Washing Water again
再次使用洗衣劑
“
Washing
”
only for the 1st
collective of laundries.
對第一批衣物進行“單洗”。
1
Put in the 2nd collective of laundries, and se-
lect the favorite washing mode.
放入第二批衣物，選擇喜歡的洗衣方式進行洗衣。
•
Set the proper water level for the laundries.
設定適合衣物的水位。
2
Rinse and spin the 1st collective of washed
laundries.
對第一批已經洗過的衣物進行沖洗和脫水。
•
Set the proper water level for the laundries.
設定適合衣物的水位。
3
Laundry with
slight dirt
ʃठ㋢᱿⠥
Washing only
܈ᘺ
Washing
ʈ
Rinsing
ʈ
Spinning
ᘺ⠥ ƺ ᗢᘺ ƺ ⌉ᖛ
Rinsing
ʈ
Spinning
ᗢᘺ
ʈ
⌉ᖛ
