7
English
(4) Check Push Lever before use.
Make sure the
Push Lever operates properly. (The Push Lever may
be called “Safety”.) Never use the Nailer unless the
Push Lever is operating properly, otherwise the Nailer
could drive a fastener unexpectedly. Do not tamper
with or remove the Push Lever, otherwise the Push
Lever becomes inoperable.
(5) Keep all screws and covers tightly in place.
Keep
all screws and covers tightly mounted.
Check their condition periodically. Never use the
Nailer if parts are missing or damaged.
(6) Do not load fasteners with Trigger or Push Lever
depressed.
When loading fasteners into the Nailer
or when connecting the air hose,
1) do not depress the Trigger;
2) do not depress the Push Lever; and
3) keep the Nailer pointed downward.
(7) Keep hands and feet away from
fi
ring head
during use.
Never place your hands or feet closer
than 8 inches (200 mm) from the
fi
ring head. A
serious injury can result if the fasteners are de
fl
ected
by the workpiece, or are driven away from the point of
entry.
(8) Do not drive fasteners into thin boards or near
corners and edges of workpiece.
The fasteners can be driven through or away from the
workpiece and hit someone.
(9) Never drive fasteners from both sides of a wall
at the same time.
The fasteners can be driven into
and through the wall and hit a person on the opposite
side.
(10) Check for live wires.
Avoid the risk of severe
electrical shock by checking for live electrical wires
that may be hidden by walls,
fl
oors or ceilings. Turn
o
ff
the breaker switch to ensure there are no live
wires.
(11) Never carry Nailer by hose.
(12) Do not disconnect air hose from Nailer with
fi
nger on Trigger.
The Nailer can
fi
re when re-
connected to An air supply.
(13)
Handle Nailer correctly.
Operate the Nailer
according to this Manual. Never allow the Nailer to
be operated by children, individuals unfamiliar with its
operation or unauthorized personnel.
(14) Never use Nailer for applications other than
those speci
fi
ed in this manual.
(15) Never modify or alter a Nailer.
Doing so may cause
it to malfunction and personal injuries may result.
(16) Close Nail Guide and do not open it during
operation.
If driving fasteners with the Nail Guide
open, the fasteners can be driven away from the
workpiece.
EMPLOYER’S RESPONSIBILITIES
1. Ensure that this MANUAL is available to operators
and personnel performing maintenance.
2. Ensure that Nailers are used only when operators and
others in work area are wearing EYE PROTECTION.
3. Enforce the use of EYE PROTECTION by operators
and others in work area.
4. Keep Nailers in safe working order.
5. Maintain Nailers properly.
6. Ensure that Nailers which require repair are not
further used before repair.
SAVE THIS MANUAL AND
KEEP IT AVAILABLE FOR OTHERS!
SAFETY
— Continued
WARNING
000Book̲NV90AG̲US.indb 7
000Book̲NV90AG̲US.indb 7
2012/11/28 14:50:58
2012/11/28 14:50:58
