21
English
7. Maintenance chart (See page 21)
8. Operator troubleshooting (See page 22)
9. Service parts list
CAUTION
●
Repair, modi
fi
cation and inspection of Hitachi
Power Tools must be carried out by a Hitachi
Authorized Service Center.
This Parts List will be helpful if presented with
the tool to the Hitachi Authorized Service Center
when requesting repair or other maintenance. In
the operation and maintenance of power tools,
the safety regulations and standards prescribed
in each country must be observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved
and modi
fi
ed to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without prior
notice.
Maintenance chart
ACTION
WHY
HOW
Drain air line
fi
lter daily.
Prevent accumulation of moisture
and dirt.
Open manual petcock.
Keep lubricator
fi
lled.
Keep the Nailer lubricated.
Fill with Hitachi pneumatic tool
lubricant.
Clean
fi
lter element and blow air
through
fi
lter in direction opposite to
normal
fl
ow daily.
Prevent clogging of
fi
lter with dirt.
Follow manufacturer’s instructions.
Clean magazine and feeder
mechanism.
Prevent a jam.
Blow clean daily.
Keep push lever working properly.
Promote operator safety and e
ffi
cient
Nailer operation.
Blow clean daily.
Lubricate the Nailer after nailing.
Extend the Nailer life.
Supply 5 – 10 drops of lubricant into
the Nailer.
Drain air compressor daily.
Keep the Nailer operated properly.
Open petcock on air compressor
tank.
SERVICE AND REPAIRS
WARNING
●
Only service personnel trained by Hitachi,
distributor or employer shall repair the Nailer.
●
Use only parts supplied or recommended by
Hitachi for repair.
All quality Nailers will eventually require servicing or
replacement of parts because of wear from normal use.
NOTE:
Speci
fi
cations are subject to change without any
obligation on the part of HITACHI.
000Book̲NV75AN̲US.indb 21
000Book̲NV75AN̲US.indb 21
2016/02/05 16:05:13
2016/02/05 16:05:13