Remote control
English-22
17.
Source
Select input source.
Combo key function for Remote Control ID
settings (Press ID Number for 3
seconds).
18.
Auto / 0
This button is used to Resync the picture;
when the picture signal becomes unstable or
picture quality deteriorates simply press this
button and the projector will automatically
adjust the screen dimension, phase, timing
and so forth.
Number for Remote ID setting used.
19.
Brightness
Displays the brightness setting bar.
20.
Contrast / 2
Displays the Contrast settings bar.
Number for Remote ID setting used.
21.
Light
Displays the light power adjustment menu.
22.
Zoom / 4
Displays the digital zoom settings bar.
Number for Remote ID setting used.
23.
Freeze
Freeze/unfreeze the picture on the screen.
24.
Blank / 6
Makes the screen blank.
Number for Remote ID setting used.
25.
STANDBY
This button is used to turn off the projector.
26.
Video / S-Video
Displays the Video source selection.
27.
Network
Open the Network menu.
28.
EXIT
Press this button to exit menu or return to
previous menu level.
29.
► /
Use this button to make your selection or
configure, adjust configuration on the menu.
Keystone can be adjusted when no other
menu is displayed.
30.
MHL
Change MHL / Projector mode.
31.
Play the following item on the programming
list for MHL.
32.
Forward in set increments for MHL.
33.
Volume / 1
Displays the Volume setting bar.
Number for Remote ID setting used.
34.
Mute /3
Mutes the built-in speaker.
Number for Remote ID setting used.
35.
3D / 5
Open the 3D Setting menu.
Number for Remote ID setting used.
36.
Status / 7
Opens the Status menu (the menu only
opens when an input device is detected).
Number for Remote ID setting used.
Note:
Remote Combo Key Settings:
ID+0: Reset Remote Control ID to
default settings.
ID+1: Set Remote Control ID to "1".
~
ID+7: Set Remote Control ID to "7".
Projector also need setting ID for
unique control. Refer to
Page 62 :
"Remote ID".
Note: When the projector is under
MHL
mode, the keypad on projector should
be same definition of the key on remote
control.
With MHL function:
MENU for App settings, ▲
Up
, ▼
Down
, ◄
Left
and ►
Right are used
as directional arrows, also included
ENTER and EXIT
.
Controlling your smart device with
the remote control:
When the projector displays the
content from your MHL compatible
smart device, you can use the remote
control to control your smart device.
To enter the MHL mode, the following
buttons are available for controlling
your smart device, Arrow keys (▲
Up,
▼
Down
, ◄
Left
, ►
Right), MENU,
EXIT
, MHL control buttons.