background image

-3-

MN1-6131 Rev.3

2. Specifications and Parts name

The specifications and the name of each part are provided below.

2-1. Specifications

Application:

Intraoperative diagnosis

Type of patient contact:

Intraoperative

Connectable instruments:

ARIETTA 70, ARIETTA 60, ARIETTA Precision, ARIETTA Prologue

NOTE:

At the time of publication of this manual, the connectable diagnostic 

ultrasound instrument or instrument software version available with this 

probe is different for each country, please refer to the instrument instruction 

manual or contact your local Hitachi representative.

Field of view:

25mm

Frequency:

8.5 MHz

Cable length:

3.0 m

Service life:

3 years

Applied part:

See Figure 1

Part treated as applied part:

Cable up to 0.2 m length from the probe tip

IPX7 range:

See Figure 1 (In case that not putting the waterproof case to the ultrasound 

probe connector) 

In case that putting the waterproof case to the ultrasound probe connector, 

whole the probe from the tip of the ultrasound probe to the connector with 

Waterproof Case WP-001 is IPX7. range

Measurement accuracy:

Refer to the instruction manual of the ultrasound diagnostic instrument

External dimensions:

See Figure 1

9

IPX7 range

Applied part

127

32

Cable length

Remark: The tolerance for the dimensions is ±10%.

Figure 1 External View 

Unit: mm

Summary of Contents for L53K













Reviews: