English
- 25 -
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except the AV
mode). By cursor action, programme selection is done
automatically.
Name:
To change the name of a decided programme, se-
lect the programme and press the
RED
button.
The first letter of the selected name will be high-
lighted. Press
a
/
b
button to change that letter and
_
/
`
button to select the other letters. By pressing
the
RED
button, you can store the name.
Insert:
Select the programme which you want to insert by
navigation buttons. Press the
GREEN
button. By navi-
gation buttons move the selected programme to the
decided programme space and press the
GREEN
button again.
Delete:
To delete a programme, press the
YELLOW
button.
Pressing the
YELLOW
button again erases the se-
lected programme from the programme list, and the
programmes below shift one up.
APS (Auto Programming System)
When you press the
BLUE
button for APS, Auto
Programming System Menu will appear on the
Screen.
PROGRAM
Country Germany
A.P.S. (Auto Programming System) Country
Press
_
/
`
button to select your country. If you want
to exit from A.P.S. function, press the
BLUE
button.
When you press
OK
or
RED
button for starting APS,
all stored programs will be erased and the following
screen will be displayed:
APS is running...
Cancel
Whenever you press the
BLUE
button, A.P.S. func-
tion stops and Program Table appears on the screen.
If you wait until the end of A.P.S., Program Table is
displayed with the programmes found and located.
Install menu in AV modes
The following screen appears in the install menu:
Colour System AUTO
VCR Off
Store Program
INSTALL
Colour System
By pressing
a
/
b
select
Colour System.
By
pressing
_
/
`
button, you can change the colour
system to
PAL, SECAM, PAL 60, NTSC 4,43, NTSC
3,58
or
AUTO.
VCR
By pressing
a
/
b
select
VCR.
By pressing
_
/
`
button, you can set the
VCR
to
ON
or
OFF
.
Store Program
By pressing
a
/
b
button, select Store Program.
Press
`
or
OK
button to store the adjustments. “Pro-
gram Stored” will be displayed on the screen.
