English
- 33 -
Appendix E: Software Upgrade
Your TV is capable of fi nding and updating new software upgrades over broadcast channels.
•
For broadcast channels search, TV looks the available channels stored in your settings. So before software
•
upgrade search, it is advised to auto search and update all available channels.
1) Software upgrade search via user interface
It is possible manually to check if there is a new software upgrade for your TV set.
•
Simply navigate on your main menu. Choose
•
Settings
and select
Other Settings
menu. In
Other Settings
menu navigate on to the
Software Upgrade
item and press
OK
button to open
Upgrade Options
menu.
In
•
Upgrade Options
menu select
Scan for upgrade
and press
OK
button.
If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download
•
progress. When download completes with success a message is displayed for reboot to activate new software.
Press
OK
to continue with the reboot operation.
2) Background search and upgrade mode
While TV is connected, in background it searches for critical software upgrades. If a critical software upgrade
•
is found it downloads the upgrade silently. When download completes with success a message is displayed
for reboot operation to activate new software. Press OK to continue with the reboot operation.
3) 3.AM search and upgrade mode
If
•
Automatic scanning
in
Upgrade Options
menu is enabled, TV wakes up at 03:00 and searches broadcast
channels for new software upgrade. If new software is found and downloaded successfully, with next power
up TV opens with new software version.
Note on reboot operation
: Reboot is the last step in software upgrade operation if download of new software is
fi nished successfully. During reboot TV makes fi nal initializations. In reboot sequence panel power is closed and
front led indicates the activity with blinking. Around 5 minutes later TV restarts with new software activated.
If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV should open with
•
new software safely. If you still can not get TV working, please kindly repeat unplug and plug sequence a few
times more. If your set still can not operate, please call the service personnel to fi x the problem for you.
Caution: While led is blinking during reboot do not unplug your TV’s power. Doing this may cause
your TV not to re-open again and can only be fi xed by service personnel.
Manual Software Update
Ensure that the ethernet cable is connected to your TV. If the ethernet cable is connected to the TV, ensure
that the TV is receiving. Check that the Good is present in the following menu path:
Menu -> Settings -> IP Settings -> Link Status -> Good
Go to Settings tab from the main menu and select Other Settings. Highlight Software Upgrade and press OK.
Select Scan for Upgrade and press OK button.
An OSD screen including the progress bar will be visible under the Software upgrade” title.
A warning screen will be displayed on the screen, stating that the TV will be rebooted. Press OK button to
fi nalize upgrade process and reboot TV.