Hitachi L37VP01U, Instructions For Use Manual

Page: 14 / 44

English - 13 -
After Automatic Search process is completed, the
following message asking for analogue channel search
appears on the screen. TV switches to the analogue
TV mode:
Select your Language, Country and Text language by
using
a
/
b
and
_
/
`
buttons. Press OK button to
continue. To cancel, press BLUE button.
For more information on this process, see “ Install
Menu ” section.
Everyday Operation
Pressing the TV/DTT button at any time while watch-
ing television programmes will switch the TV set be-
tween the digital terrestrial television broadcasting
and the analogue broadcasting.
Information Banner
• Whenever you change the channel using the P + or
P - buttons or the number buttons, TV displays the
channel picture along with an information banner at
the bottom of the screen. This will remain on the
screen for approximately three seconds.
• The information banner can also be displayed by press-
ing the button at any time while watching the TV.
Pressing the button again removes the banner.
The information banner gives a number of facts on the
channel selected and the programme on it:
• The name of the channel is displayed along with its
channel list number and an indication of the strength of
the signal received on this tuning channel.
• The current and next programme information are given
with the start and finish time.
• The current time information is displayed along with
channel name.
Hint
Not all channels broadcast the programme data. If the
name and times of the programme are not available then
“No Information Available” is displayed in the information
banner.
If the selected channel is locked, you must enter the correct
four digit key to view the channel.
ELECTRONIC PROGRAMME GUIDE(EPG)
Some, but not all, channels send information about the cur-
rent and next events. Please note that event information is
updated automatically. If there is no event information data
available for channels, only channel name with “No Infor-
mation Available” banner is displayed.
• Press GUIDE button to view the EPG menu.
• Press or buttons to navigate in Channels or
Programmes.
• Press or buttons to navigate through the channel
and programme list.
• In EPG Menu, you can easily see the extended help
information by pressing the button and by pressing
this button again you can close this window.
• In the EPG Menu all channels are displayed. The current
channel is highlighted when you enter the EPG menu.
• Use or buttons to change the channel. Also
press RED or GREEN buttons to make page up/down
scroll for the channels. And press OK button to
watch the highlighted channel.
• If you highlight an event, short event description,
extended event description, start and finish time of
the event are displayed on the screen.
• If you press OK button when a next event is high-
lighted, a reminder is set for the highlighted
programme and a clock icon appears across the
highlighted channel line as shown in the following
EPG menu figure.
Programme reminders is set to signal that a
programme is about to start when you are watching
another channel. If you set reminder to a programme,