Hitachi L26-H03B, Service Manual

Page: 8 / 49

L26-H03B/ L26-H03W/ L32-H03B/ L32-H03W
8
6. Adjustment
6.1 White Balance Adjustment
Approximately 2 hours should be allowed for warm up before proceeding white balance adjustment.
Before White balance adjustment, you must set the color analyzer CA210.
6.1.1 Calibration
1. Receive XGA 60Hz 100% white signal by PC input.
2. Select PC input by R/C Input Select button.
3. Enter FACTORY MODE by R/C [
べんり
][
青
][9][1][1][1] (as picture 1, picture 2)
Picture 1 Remote Controller Picture 2 FACTORY MODE Menu
4. Choose "OPTION" by R/C [ 上／下 ] button.
Then press R/C [
決定
] button. -> Enter to OPTION menu. (as picture 3)
Picture 3 OPTION Menu
5. Choose "PC CALIBRATE" by R/C [
上／下
] button.
Then press R/C [
右
] button. -> Value changes 0 to 1 (red letter).
Then press R/C [ 決定 ]. -> PC CALIBRATE executed, and value returns to 0.
6. Press R/C [
もどる
] -> Return to FACTORY MODE menu.
6.1.2 Color Temperature Adjustment
1. Set picture mode "
スーパー
" by Menu.
1.1 Exit FATORY MODE by [ メニュー ] button.
1.2 Enter the "
トップメニュー
" by R/C [
メニュー
] button. Then forward to "
映像設定
" - "
画質設定
". ("
画質設定
"
menu indicated.)
1.3 Confirm that "
対象コンテンツ
" is set to "
共通
".
1.4 Set " 映像モード " to " スーパー ". Then exit " トップメニュー " by [ メニュー ] button.
1.5 Re-enter FACTORY MODE. (see 6.1.1 item 3.)