Hitachi L26-H03B, Service Manual

Page: 10 / 49

L26-H03B/ L26-H03W/ L32-H03B/ L32-H03W
10
Bb = [B GAIN] / [R/GAIN] * 1024 = ____ (Calculated)
5.6 Change R GAIN value to Rb, G GAIN value to Gb, B GAIN value to Bb.
5.7 To adjust color temp of another input, change input name and input signal, then repeat 5.1 to 5.6.
6. Set picture mode " スタンダード " by Menu.
6.1 Exit FATORY MODE by [
メニュー
] button.
6.2 Enter the "
トップメニュー
" by R/C [
メニュー
] button. Then forward to "
映像設定
" - "
画質設定
". ("
画質設定
"
menu indicated.)
6.3 Confirm that "
対象コンテンツ
" is set to "
共通
".
6.4 Set " 映像モード " to " スタンダード ". Then exit " トップメニュー " by [ メニュー ] button.
6.5 Re-enter FACTORY MODE. (see 6.1.1 item 3.)
7. Color Temp. adjustment (MID)
7.1 Choose "TEMP" by R/C [ 上／下 ] button. Then choose value "MID" by R/C [ 左／右 ] button, then press [ 決定 ].
7.2 Input signal from specified terminal as shown in 5.2.
7.3 Choose "SOURCE" by R/C [ 上／下 ] button. Then choose the input from the input names in "SOURCE" by R/C
[
左／右
] button. Then press R/C [
決定
] button. -> Change to selected input.
7.4 Adjust Color temperature of MID.
Do not change R GAIN (keep the value 1024), change G GAIN and B GAIN, to meet the specified x and y value:
x = 0.285 +/-0.005, y = 0.293 +/-0.005.
7.5 To adjust color temp of another input, change input name and input signal, then repeat 7.1 to 7.4.
8. Color Temp. adjustment (LOW)
8.1 Choose "TEMP" by R/C [
上／下
] button. Then choose value "LOW" by R/C [
左／右
] button, then press [
決定
].
8.2 Input signal from specified terminal as shown in 5.2.
8.3 Choose "SOURCE" by R/C [ 上／下 ] button. Then choose the input from the input names in "SOURCE" by R/C
[
左／右
] button. Then press R/C [
決定
] button. -> Change to selected input.
8.4 Adjust Color temperature of LOW.
Do not change R GAIN (keep the value 1024), change G GAIN and B GAIN, to meet the specified x and y value:
x = 0.314 +/-0.005, y = 0.316 +/-0.005.
8.5 To adjust color temp of another input, change input name and input signal, then repeat 8.1 to 8.3.
9. Choose "SAVE" by R/C [
上／下
] button. Then choose value "1" by R/C [
左／右
] button, then press [
決定
].
(After this, value returns to "0" automatically.)
10. Choose "PQCOFF" by R/C [
上／下
] button. Then choose value "0" by R/C [
左／右
] button, then press [
決定
].