- 38 -
Program Table lists the channels that are
stored in the memory. By moving the cursor in
four directions, you can reach 20 programmes
in the same page. You can scroll up or scroll
down to see all the programmes while in TV
mode by pressing the navigation buttons. By
cursor action, programme selection is done
automatically.
Name
To change the name of a programme, select
the desired programme and press the
YELLOW
button.
The first letter of the selected name starts to
blink. Press
a
/
b
button to change that letter
and
_
/
`
button to select the other letters. By
pressing the
YELLOW
button, you can store
the name.
Move
Select the programme that you want to insert
by using the navigation buttons. Press the
GREEN
button. Using navigation buttons, move
the selected programme to the decided
programme space and press the
GREEN
button again.
Delete
To delete a programme, press the
RED
button.
Pressing the
RED
button again erases the
selected programme from the programme list
and the programmes below shift one line up.
APS (Auto Programming System)
When you press the
BLUE
button for APS,
Auto
Programming System
menu will appear on
the screen.
Favourite Mode
You can set various channels as favourites
so that only the favourite channels are
navigated. To set a favourite, use the navigation
buttons to select a channel and then press
the
item. The channel selected as a
favourite appears in the Program Table with a
favourites icon (
) against the channel
name. For removing a favourite, carry out the
same operation. To exit, press
M
.
Program Lock
3URJUDP/RFN
(QWHU3,1
&KDQJH3,1
%DFN0HQX
([LW79
Program Locking provides a password-
protected access to channels selected by
parents. In order to lock a channel you should
know the Program Lock password (default
value is set to
0000
in the factory and can only
be changed from the
Program Lock
menu).
Enter PIN
Select the channel that you desire to lock by
highlighting it and then press the
button.
When the button is pressed, Program Lock
menu will be displayed on the screen. After
entering the pin code, desired channel will be
locked. The program lock icon will appear next
to the channel name. When the locked
channel is selected through
P+
or
P-
buttons,
the following warning screen will be
displayed:
3URJUDP,V/RFNHG
<RX0D\8QORFNWKLV3URJUDP
IURP3URJUDP7DEOH
Change PIN
Select
Change PIN
by pressing / button.
Use button to change the PIN code. After
pressing button, the following message
appears on the screen:
3URJUDP/RFN
(QWHUROG3,1
%DFN0HQX
([LW79
01-HITACHI-ENG-19856W-MB27 PEU IDTV-1055UK-VGA-(LIPS)-10059156-5013xxxx.p65
06.10.2008, 13:16
38
Summary of Contents for L19HP03C
Page 47: ......
