(7) INITALIZE
：
Initializing in the factory-shipments state for
the current scene file.
The following message is show after INITIALIZE
command execution.
Push R
：
INITIALIZE command cancel
Push D
：
INITIALIZE command execution
MODE
：
Set the display position of a camera title
OFF
：
A character is not displayed.
TOP
：
A character is displayed on the upper part of a
screen.
.BOTTOM
：
A character is displayed on the lower part of a
screen.
<TITLE setting>
(1) In the state where a cursor is in TITLE, if the Set button is
pushed, a cursor will move to the setting line of TITLE data,
and the 1st character will blink.
。
(2)
Select the characters by four directions button.
(3)
The character chosen is inputted when the Set button was
pushed. This cursor moves to the following character.
(4)
Once it goes into character setting mode The Set button
turn into a character selection button, and the usual menu
ON/OFF operation is forbidden.
(5)
If the input of a character is completed, a cursor will be
moved to RET by four directions buttons. If the Set
buttons are pushed, a cursor will move to TITLE and will
return to the usual menu operation.
(6) <-: Character blink of a character setting part moves to the
one character left.
(7) ->: Character blink of a character setting part moves to the
one character left.
(8) DEL : The blinking character eliminate.
(9) INS
: A space is inserted in the position of the blinking
character.
(10) RET : A cursor is moved to DATA SET.
TITLE
9
(1) LENS TYPE:DC type or VIDEO type
VIDEO : B/W MODE AUTO does not operate at the time of AGC
OFF and SENSUP OFF / manual..
DC : To which control of the lens of DC input control (position
servo) is attained.
(2) IRIS GAIN
：
Set a control standard level
-128 to
0 to127
(3)LENS OPEN
：
A lens is opened wide and AES is turned ON.
OFF
：
Control automatic iris
ON
：
Lens open and AES control.
At the time of ENS OPEN ON, * is attached to a shutter speed
command and operation becomes improper.
(4)
Level indicator
The NAM level meter for ALC
-
Explanation -
When the value of NAM detection is equal to the reference
level of ALC, a marker moves to central "+" mark. When it is
less than reference level, a marker moves on the left of a
center. On the contrary, when it is larger than reference
level, a marker moves on the right of a center.
LENS
SYSTEM MENU
LENS
LENS TYPE :DC
IRIS GAIN : 0
LENS OPEN :OFF
L H
……Lens type setting
……Iris gain setting
……Lens open setting
……SDI output setting
……TV format setting
(1)
SDI OUTPUT
：
Set transmission mode
HD-SDI
：
100
ｍ
transmission
HD-VLC
：
300
ｍ
transmission
(2) TV FORMAT (video output)
TV FORMAT function setting.
Set data
For edit control
Character
R
Y
G
C
B
M
(SAT)
(HUE)
