Hitachi KP-F1, Technical Operation Manual

Page: 7 / 35

7
Gamma correction 1 (factory setting) or selectable by internal switch
Separately settable to two video channels
AGC
Fixed or AGC: Available to only VIDEO OUT 1
External switch selectable. Fixed = factory setting.
Gain selection
VIDEO 1 : Fixed or set by knob
VIDEO 2 : Fixed
The external switch is selectable. Finely adjustable
to 2 channels by knob. (Fixed gain at factory
setting)
Field-on Demand function
ON/OFF: Internal switchable ONE trigger, TWO
trigger, and FIXED SHUTTER mode selectable by
internal switch. (Factory setting: OFF)
Power supply
12 Volts DC
±
1Volt
Power consumption 250mA or less
Ambient conditions
Operating: -10 to 50 degrees C
90% RH or less. Storage: -20 to 60 degrees C
70% RH or less
Caution: For continued stable operation, the camera should be used under 40 degrees C or less
when it is used continuously for an extended period of time.
Anti-vibration
7G (10 to 60 Hz, amplitude: 0.98 constant,
60 to 200 Hz, amplitude: variable, acceleration:
constant. 10 to 200 Hz. Sweep: 1min., XYZ, 30
min.
Dimensions
44 (W) x 44 (H) x 67 (D) mm
Mass 150 grams approximately
3.1 Composition
1) Camera body (with IR cut filter)
2) Operation manual
3.2 Optional accessories
1) Tripod adapter, TA-MI (23855AX*)
2) 12-pin plug, HRIOA-IOP-12S(01) (23810AX*)
3) 6-pin plug, HR-IOA-7R-6P(OI) (JMH0092*)