--- 10 ---
(2) Disassembly of Lever (A) Ass'y
[50]
(Fig. 10)
Being very careful not to lose the Spring
[56]
, loosen and remove the Knob Nut
[57]
. And remove Lever (A)
Ass'y
[50]
, Lever Sleeve
[54]
and Lever Holder
[55]
. When removing the Hex. Socket Set Screw M5 x 8
[53]
,
be very careful not to lose Spring (C)
[52]
and Steel Ball D3.97
[51]
.
Fig. 10
Knob Nut
[57]
Steel Ball D3.97
[51]
Base (A)
[39]
Fig. 11
Lever Sleeve
[54]
Spring (C)
[52]
Hex. Socket Set Screw M5 x 8
[53]
Lever Holder
[55]
Spring
[56]
9-1-3. Plunge Base for Models KM 12VC and KM 12SC
(1) Separating Base (B)
[97]
and the Housing Holder
[73]
(Fig. 11)
Spring (L)
[67]
Nut M10
[84]
Lever (B)
[91]
Housing Holder
[73]
Special Nut (A) M10
[86]
Holder Cover
[88]
Base (B)
[97]
Machine Screw
(W/Washers)
M5 x 16 (Black)
[87]
Knob
[85]
Spring (R)
[72]
Lever (A) Ass'y
[50]
With fixing Lever (B)
[91]
, remove the Nut M10
[84]
with a hex. bar wrench 10 mm. And then
remove the Knob
[85]
and Special Nut (A) M10
[86]
. Release Lever (B)
[91]
and pull out the
Housing Holder
[73]
. Remove the four
Machine Screws (W/Washers) M5 x 16 (Black)
[87]
and remove the Holder Cover
[88]
.
Caution: When pulling out the Housing Holder
[73], be careful not to pop out Spring (L)
[67] and Spring (R) [72].
