background image

42

SCREEN menu

Item

Description

C.C.

(Closed Caption)

The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.

DISPLAY

Select Closed Caption DISPLAY setting from following options 
using ▲/▼ buttons.

AUTO 

 ON 

 OFF 

   
AUTO :  Closed Caption automatically displays when the volume 

is muted.

ON : Closed Caption is on.
OFF : Closed Caption is off.

• The caption is not displayed when the OSD menu is active.
• The Closed Caption is the function to display the dialogue, 
narration, and / or sound effects of a television program or other 
video sources. The Closed Caption availability is depending upon 
broadcaster and/or content.

MODE

Select Closed Caption MODE setting from following options using 
▲/▼ buttons.

CAPTIONS 

 TEXT

CAPTIONS : Display Closed Caption.
TEXT :  Display Text data, which is for additional information such 

as news reports or a TV program guide. The information 
covers the entire screen. Not all of the C.C. program has 
Text information.

CHANNEL

Select Closed Caption CHANNEL from following options using ▲/▼ 
buttons.

 2 

 3 

 4

1: Channel 1, primary channel / language
2: Channel 2
3: Channel 3
4: Channel 4

The channel data may vary, depending on the content. Some 
channel might be used for secondary language or empty.

Summary of Contents for Innovate ED-X26




































































































Reviews: