Hitachi HV-D27, Operation Manual

Page: 35 / 55

17
＜ ＜ ＜ ＜
ID/TITLE Setup Procedure
＞ ＞ ＞ ＞
①
With the cursor located at DATA SET, press the D button. The cursor moves to the ID data set
position an the first character flashes.
②
Using the L, R, U and D buttons, select an input character.
③
Press the SET UP button, and the selected character will be entered. (The cursor will then move
to the next character position.)
④
In the same manner, repeat the above steps
②
and
③
to enter an ID code and TITLE.
⑤
On completion of character input, bring the cursor to RET using the L, R, U or D button. Then,
press the SET UP button.
The cursor is returned to DATA SET.
⑥
To quit the SPECIAL SET mode, press the SET UP button.
← ：
Flashing shifts one character toward the left.
→ ：
Flashing shifts one character toward the right.
DEL
：
Flashing character is deleted, and the subsequent character string is shifted left.
INS
：
A space is inserted at the flashing character position, and the subsequent character string is
shifted right.
RET
：
The cursor is returned to DATA SET.
13. (FILE) TITLE
Menu for setting the scene file name.
1) File-1: Set File-1 title.
2) File-2: Set File-2 title.
3) File-3: Set File-3 title.
Setting procedure
1) Select input characters with the L, R, U and D buttons.
2) Press the Setup button to decide a character. The cursor shifts to the next character position.
3) In the same manner, set the titles for Files 2 and 3.
4)
After completing character input, shift the cursor to RET with the L, R, U and D buttons, and press
Setup. The cursor shifts to (File) Title.
5) Press the Setup button to exit the Special set mode.
←
: Move 1 character toward left. The selected character flashes.
→
: Move 1 character toward right. The selected character flashes.
DEL: Delete flashing character and close vacated space.
INS: Insert a space at the flashing character position and shift subsequent characters toward the right.
RET: Shift cursor to (File) Title.
14. DTL
Menu for setting detail parameters
１）
LEVEL DEP
：
Dependent level setting
Detail amount, and noise, can be reduced in scene dark components.
Setting range is -128 to +127. Press the R button to increase the value, reduce the detail amount