manualshive.com logo in svg

Hitachi HTD-K200E, Instruction Manual

Share
Download
Hitachi HTD-K200E Instruction Manual Download Page 21

21

GB

For more settings, please refer to Audio Setup section for more details.

Turning the Home Theatre System On

Start Up

1.  Press the ON/STANDBY button on the DVD player or the   STANDBY/ON button on 

the remote control to turn the system on. 

2.  Press the SOURCE button repeatedly on the unit or the DVD button on the remote 

control to select DVD mode.

3.  Turn on the TV and select the video input connected to the DVD player.

Adjusting the Speakers Volume and Balance

Subwoofer Speaker

Press the SUBWOOFER button on the DVD player or on the remote control and then press 

the   /   button on the remote control to select the desired setting: soft / balance / strong 

/ powerful.

Surround Sound

Press the SURROUND button on the remote control and then press the   /   button on 

the remote control to select the desired setting: 5.1 ch / Stereo.

Volume Adjustment

1.  Press the VOLUME   /   button on the DVD player or the VOL+ / – button on the 

remote control to adjust the volume.

2.  Press the MUTE button on the remote control to switch the sound off. Press the MUTE 

button on the remote control again or the VOL+ / – button on the remote control to 

resume normal playback.

If the AUX IN or AUDIO IN audio signal is mono, you may not receive audio on all speakers.

Level

Press the LEVEL button on the remote control and then press the VOL+ / – button on the 

remote control to adjust the value.

HTD-K200E_IB_GB_120725_Zell.indd   21

25/7/12   2:53 PM

Summary of Contents for HTD-K200E









































Reviews:

No comments

Brands by name

Popular brands

Load more brands