Hitachi HTD-K180UK, Owner'S Manual

Page: 24 / 54

Ä 24
AV MODE
You can use AV connection only in Normal operation.
You can switch to your connected Video Source using
mode button. In this connection you can use your Av
receiver as an Amplifier. Standby, Mute, Speaker Volume
and Mode buttons can be used in this mode .
SCART MODE
In this mode scart audio and video inputs are used. You
can use Scart connection in Standby and Normal
operation.
IN STANDBY MODE
If there is a Video and Audio signal in AV Input of
receiver, this signal will be given as a SCART output
automatically. Standby, Open/Close, and Play buttons
can be used in this mode.
IN NORMAL MODE
You can switch to your connected Video Source using
mode button. In this connection you can use your Av
receiver as an Amplifier. Standby, Mute, Speaker
Volume and Mode buttons can be used in this mode.
TV MODE
In this mode audio input signals from output scart are
amplified and sent to 5.1 speaker outputs.
RADIO DATA SYSTEM (RDS)
In TUNER mode, use DISPLAY key to change
following RDS modes :
• RDS OFF
Frequency information is displayed.
• PROGRAMME SERVICE NAME (PS)
This field is 8 characters long. Generally it is used for
static station name. But some stations broadcast longer
messages dynamically using this field.
• RADIO TEXT (RT)
This message is at most 64 characters and will scroll
from right to left.
• PROGRAMME TYPE (PTY)
There is about 30 different programme types (News,
Sport, Pop M, Classic, )
In this mode use SEARCH MODE key to make PTY
SEARCH. Next channel with the same PTY will be
switched.
Note :
PTY search is done over prestored PTY information.
• DATE
Date information is updated every one minute if available.
• TIME
Time information is updated every one minute if available.
Notes :
•
RDS is available only in FM Tuner Mode.
• RDS information will be displayed if available.
If you can’t get RDS information
• plase check your antenna performance
• station may not be sending data