Hitachi HT-4139, Installation Manual, Page: 10 / 13

Rev0 10.03.24
-G10-
5.2.2 Requirement for USB
The USB port and the USB driver should be installed into the host systems with which set up the Image Scanner
Driver properly.
Check the following items.
No. Check Item Check Result
1 If the USB port dedicated to the OCR scanner is installed?
2 If other boards (SCSI board, LAN board, etc.) are installed?
3
If any conflict of hardware? (IRQ
、
I/O port address)
4 If the USB driver is installed and work properly?
(1) Windows XP
(1) Open Device Manager by clicking the
Start button,
clicking Control Panel , clicking System , and then clicking
Hardware, and then clicking Device Manager .
●
Points need to be confirmed
If the host controller corresponds to USB 2.0 is working
properly.
Indication sample of the host controller correspond to USB
2.0
・
xxx USB Enhanced Host Controller
・
Standard Enhanced PCI to USB Host Controller
・
Standard enhance PCI to host controller
(2) Windows Vista
(1)Open Device Manager by clicking the Start button,
clicking Control Panel , clicking System and Maintenance ,
and then clicking Device Manager .
If you are prompted for an administrator password or
confirmation, type the password or provide confirmation.
●
Points need to be confirmed
Check if the host controller corresponds to USB 2.0 is
working properly.
Indication sample of the host controller correspond to USB
2.0
・
XXX USB Enhanced Host Controller