manualshive.com logo in svg

Hitachi HDT722516DLA380, Specifications

The Hitachi HDT722516DLA380 is a high-performance hard drive offering ample storage space for your digital needs. This user-friendly product comes with a detailed manual, which can be easily downloaded for free from manualshive.com. Discover its impressive specifications and find all the necessary instructions to optimize its use.

Share
Download
background image

Deskstar T7K250 Hard Disk Drive Specification

201 

 

12.43.1.2  S.M.A.R.T. Read Attribute Thresholds (subcommand D1h)

This subcommand returns the Attribute Thresholds of the device to the host. Upon receipt of the SMART Read 
Attribute Thresholds subcommand from the host, the device reads the Attribute Thresholds from the Attribute 
Threshold sectors and then transfers the 512 bytes of Attribute Thresholds information to the host.

12.43.1.3  S.M.A.R.T. Enable/Disable Attribute Autosave (subcommand D2h)

This subcommand enables and disables the Attribute Autosave feature of the device. The S.M.A.R.T. Enable/Dis-
able Attribute Autosave subcommand allows the device to automatically save its updated Attribute Values to the 
Attribute Data Sector periodically or causes the Autosave feature to be disabled. The state of the Attribute 
Autosave feature—either enabled or disabled—will be preserved by the device across the power cycle.

A value of 00h written by the host into the Sector Count Register of the device before issuing the S.M.A.R.T. 
Enable/Disable Attribute Autosave subcommand will cause this feature to be disabled. Disabling this feature does 
not preclude the device from saving Attribute Values to the Attribute Data sectors during another normal operation 
such as a power-up or a power-down.

A value of F1h written by the host into the device's Sector Count Register before issuing the S.M.A.R.T. Enable/
Disable Attribute Autosave subcommand will cause this feature to be enabled. Any other nonzero value written by 
the host into this register before issuing the S.M.A.R.T. Enable/Disable Attribute Autosave subcommand will not 
change the current Autosave status. However the device will respond with the error code specified in Table 137:  
“S.M.A.R.T. Error Codes” on page 212.

The S.M.A.R.T. Disable Operations subcommand disables the Autosave feature along with the S.M.A.R.T. opera-
tions of the device.  

Upon the receipt of the subcommand from the host, the device asserts BSY, enables or disables the Autosave fea-
ture, clears BSY, and asserts INTRQ.

12.43.1.4  S.M.A.R.T. Save Attribute Values (subcommand D3h)

This subcommand causes the device to immediately save any updated Attribute Values to the device's Attribute 
Data sector regardless of the state of the Attribute Autosave feature. Upon receipt of the S.M.A.R.T. Save Attribute 
Values subcommand from the host, the device asserts BSY, writes any updated Attribute Values to the Attribute 
Data sector, clears BSY, and asserts INTRQ.

12.43.1.5  S.M.A.R.T. Execute Off-line Immediate (subcommand D4h)

This subcommand causes the device to immediately initiate the set of activities that collect Attribute data in an off-
line mode (off-line routine) or execute a self-test routine in either captive or off-line mode. The Sector Number reg-
ister shall be set to specify the operation to be executed.

Off-line mode:

 The device executes command completion before executing the specified routine. During execu-

tion of the routine the device will not set BSY nor clear DRDY. If the device is in the process of performing its rou-
tine and is interrupted by a new command from the host, the device will abort or suspend its routine and service the 

Sector 

Number

Operation to be executed

0

Execute S.M.A.R.T. off-line data collection routine immediately

1

Execute S.M.A.R.T. Short self-test routine immediately in off-line mode

2

Execute S.M.A.R.T. Extended self-test routine immediately in off-line mode

127

Abort off-line mode self-test routine

129

Execute S.M.A.R.T. Short self-test routine immediately in captive mode

130

Execute S.M.A.R.T. Extended self-test routine immediately in captive mode

Summary of Contents for HDT722516DLA380








































































































































































































































































Reviews:

No comments

Related manuals for HDT722516DLA380

Stardom MR2-BA31BP Quick Setup Manual preview
MR2-BA31BP
Brand: Stardom Pages: 2
Xyratex RS-1600-FC-FFX2 Installation And User Manual preview
RS-1600-FC-FFX2
Brand: Xyratex Pages: 82
LaCie 301273 User Manual preview
301273
Brand: LaCie Pages: 27
IBM 7208 345 Service Manual preview
7208 345
Brand: IBM Pages: 68
Oracle StorageTek T10000D Manual preview
StorageTek T10000D
Brand: Oracle Pages: 51
Impediment RS-1600-X24 User Manual preview
RS-1600-X24
Brand: Impediment Pages: 256
Spectra Logic Spectra 50 Supplementary Manual preview
Spectra 50
Brand: Spectra Logic Pages: 15
Yardmaster 810 AZT Assembly Instructions Manual preview
810 AZT
Brand: Yardmaster Pages: 24
Panasonic RP-SM16GFE1K Operating Instructions Manual preview
RP-SM16GFE1K
Brand: Panasonic Pages: 18
Clarke CWC114 Assembly Instructions Manual preview
CWC114
Brand: Clarke Pages: 8
Fujitsu Eternus DX80 S2 User Manual preview
Eternus DX80 S2
Brand: Fujitsu Pages: 186
Fujitsu ETERNUS DX60 User Manual preview
ETERNUS DX60
Brand: Fujitsu Pages: 242
CalDigit tuff-nano User Manual preview
tuff-nano
Brand: CalDigit Pages: 14
Viking Slim SATA Manual preview
Slim SATA
Brand: Viking Pages: 33
Agilent Technologies 04287-65000 Service Note preview
04287-65000
Brand: Agilent Technologies Pages: 14
Targus ADW02US User Manual preview
ADW02US
Brand: Targus Pages: 4
OLT GS84-S-FJ-Metal Assembly Manual preview
GS84-S-FJ-Metal
Brand: OLT Pages: 39
OLT GardenSaver GS124-SLIDER-PLY-AK Assembly Manual preview
GardenSaver GS124-SLIDER-PLY-AK
Brand: OLT Pages: 40

Brands by name

Popular brands

Load more brands