Hitachi HDC-761E Instruction Manual Download

Page: 48 / 53

EN-47

TROUBLESHOOTING GUIDE

Symptom

Possible causes

Solutions / Corrective Actions

Power does not
turn on.

* The battery has run out.
* The battery is not oriented

correctly.

* The battery cover is not

closed properly.

* Load new or fully charged battery.
* Load the battery in the correct

direction.

* Close the battery cover correctly.

Camera
suddenly
powers down.

* The function of [Auto Shut

Down] in the

mode has

been activated.

* The battery has run out.

* Turn the power back on and set

the option of [Auto Shut Down] to
[Off].

* Load new or fully charged battery.

Image is not
captured when
the shutter
release button
is pressed.

* The camera is in the

mode.

* Memory is full.

* Rotate the mode dial to

, , ,

or .

* Transfer the desired files to your

computer and then delete
unnecessary files, or use a
different memory card.

Flash does not
fire.

* Flash off is selected in flash

mode.

* 10+2 sec. Self-timer is

selected in self-timer mode.

* The [Capture Mode] is set

to [Burst] or [AEB].

* The camera is in the

(video) mode.

* Select a different flash mode.
* Select [Single] in the [Capture

Mode].

* Switch the mode dial to another

mode.

Continuous
shooting is not
possible.

* The capacity of the built-in

memory or SD memory
card is full.

* Insert SD memory card with

available

space or delete

unwanted images.

Cannot transfer
files over a USB
connection.

* USB cable is connected to

the computer improperly.

* Camera is turned off.

* Check all connections.
* Turn on the camera.

Summary of Contents for HDC-761E






















































Search results

Summary of Contents for HDC-761E

Reviews:

Related manuals for HDC-761E

Brands by name

Popular brands

Hitachi HDC-761E, Instruction Manual

Search results

Summary of Contents for HDC-761E

Reviews:

Related manuals for HDC-761E

Brands by name

Popular brands