EN-11
GETTING STARTED
Preparation
1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Insert the supplied battery with correct orientation as shown. (label side back)
4. Insert an SD/SDHC memory card (Optional).
The camera has 32MB internal memory(10MB available for image storage), but
you can load an SD/SDHC memory card to expand the camera’s memory capacity.
Be sure to format the memory card with this camera before its initial usage.
5. Close the battery/memory card cover and make sure it is locked securely.
To prevent valuable data from being accidentally erased from an SD/SDHC
memory card, you can slide the write protect tab (on the side of the SD/
SDHC memory card) to “LOCK”.
To save, edit, or erase data on an SD/SDHC memory card, you must
unlock the card
/
To prevent damaging of an SD/SDHC memory card, be sure to turn off
the power when inserting or removing the SD/SDHC memory card. If inserting or removing the
SD/SDHC memory card with the power on, the camera will automatically turn off.
Charging the Battery
The battery is not fully charged at the time of purchase. Before use, be sure to charge
the battery until the status LED lights red.
1. Connect camera to AC/DC adapter with USB cable.
2. Insert the plug into a wall outlet.
The status LED blinks red when charging has started and
lights red when charging is completed.
If the status LED does not light, the camera is not
correctly connected or the battery, camera or AC/DC
adapter may be damaged.
Charging time varies according to the ambient temperature and the status of
battery.
The included AC/DC adapter differs depending on the region where you purchased the camera.
User can also charge the battery by connecting camera to computer with USB cable.
1
2
