Hitachi HDC-1051E Page 75 Instruction Manual Download

Page: 75 / 91

EN-74

tup 1 M

Set your camera’s operating environment.

1. Slide the mode switch to [

2. Press the

MENU

button, and select the [Setup1] menu with the

button.

The [Setup1] menu is displayed.

3. Select the desired setting with the

buttons, and press the

SET

button to enter its respective menu.

4. Select the desired setting with the

buttons, and press the

SET

button.

5. To exit from the menu, press the

MENU

button.

Voice Memo

Refer to section in this manual titled “

Attaching Voice Memos

” for further details.

Media Info.

This displays the free capacity of the SD memory card (or internal memory). If the SD memory card is not
inserted, free capacity of internal memory is displayed.

Fr. No. Reset

This creates a new folder. The captured images are recorded to the newly created folder from number 0001.
* Cancel / Execute

Format

Refer to section in this manual titled “Formatting an SD Memory Card or Internal Memory” for further details.

Beep

Refer to section in this manual titled “Beep” in Photography Menu (Function tab) for further details.

Start Logo

Refer to section in this manual titled “Changing the Camera Start Logo Image” for further details.

Summary of Contents for HDC-1051E




























































































Search results

Summary of Contents for HDC-1051E

Reviews:

Related manuals for HDC-1051E

Brands by name

Popular brands

Hitachi HDC-1051E, Instruction Manual

Search results

Summary of Contents for HDC-1051E

Reviews:

Related manuals for HDC-1051E

Brands by name

Popular brands