Hitachi HDB72 ARGOS Instruction Manual Download Page 13

 

12

5.1.1.1. NAVIGATING THE WHOLE LIST OF CHANNELS  

In the channel table 

moves the cursor to select the previous or next channel. RED and GREEN buttons 

select page up and down. 

To watch a specific channel, highlight it using the 

 buttons or the Red/Green buttons, then press SELECT, 

if the SELECT box is highlighted. The name and number of the selected channel will be displayed in the top-right 

corner of the screen. 

If the selected channel is password protected, a pop up menu will be displayed. If the correct code is entered the 

selected channel can be watched.  After the Password box has disappeared you can use the 

 buttons to 

navigate to other channels.  The scroll bar in the middle of the screen shows the relative position of the current 

channel with respect to the whole list. 

5.1.1.2. DELETING UNWANTED CHANNEL  

To delete a channel highlight it using “

5

/

6

” RED/GREEN, then highlight the “Delete” button using “

3

/

4

”and press 

SELECT. A message is displayed to confirm your decision, if you still want to delete press SELECT once more and 

the channel will be deleted, the operation will be cancelled if you select “NO”. 

5.1.1.3. RENAMING CHANNELS 

 

To rename a specific channel, the channel must be highlighted. Select “Edit Name" button and press SELECT. The 

name appears on the right side of the menu with the first character highlighted. By means of “

3

/

4

/

5

/

6

” keys the 

characters can be changed.Pressing MENU cancels the editing and SELECT

 

saves the new name. 

5.1.1.4. ADDING LOCKS TO CHANNELS  

Channel Locking provides a password-protected access to channels selected by parents. In order to lock a channel 

you  should  know  the  parental  Lock  password  (set  to  0000  in  the  factory  and  can  only  be  changed  from  the 

Configuration Menu), highlight the channel to be locked and select the “Lock” button, when SELECT is pressed a 

password  dialog  is  displayed.  Enter  the  parental  Lock  code  and  the  Lock  icon  will  be  displayed  in  front  of  the 

selected channel. Repeat the same operation to cancel the Lock. 

5.1.1.5. SETTING FAVOURITES   

There will be some channels that you tend to watch more 

often  and  some  only  occasionally.  The  favourite  mode 

allows  the  most-watched  channels  to  accessed  more 

easily, leaving the less-watched channels accessible but 

out  of  the  way.  Any  channel  can  be  a  favourite  channel 

and  the  Channel  List  menu  is  used  to  label  those 

channels you want as favourites. Display the Channel List 

menu  screen  by  highlighting  Channel  List  on  the  Main 

Menu and pressing [SELECT]. 

 

Use  the  “

3

”  or  “

4

“  keys  to  highlight  the  FAVOURITE 

button  at  the  base  of  the  screen  and  then,  in  turn, 

highlight  each  channel  that  is  required  to  be  a  favourite 

channel,  using  the  “

5

”  and  “

6

”  keys  and  press 

[SELECT]. A channel selected  as a favourite appears in 

the main channel list with a favourites icon against the channel name. 

 

A  channel  can  have  its  favourites  status  removed  by  repeating  this  procedure,  to    remove  the  icon.  Leave  the 

Channel List menu by pressing [MENU].Once the required channels have been marked as favourite channels, the 

favourite mode can be activated to allow easy access to them. Press the [MENU] key to display the Main Menu, the  

6

” key twice to highlight Configuration, and press [SELECT] to display the Configuration screen. Press the  “

6

” 

key four times to highlight the Favourite Mode line and using the “

3

” or “

4

“ keys change the setting from Off to 

On. 

 

Summary of Contents for HDB72 ARGOS



























Reviews: