Hitachi H90SE, Technical Data And Service Manual

Page: 28 / 29

--- 26 ---
PARTS
H 90SE
ITEM
NO.
CODE NO. DESCRIPTION
NO.
USED
REMARKS
* 41 981-987Z CORD CLIP 1 FOR SUI
42 982-095 TAPPING SCREW (W/WASHER) D4X20 2
* 43 992-891 SWITCH (A) (1P SCREW TYPE) W/O LOCK 1
* 43 981-533Z SWITCH (2P PILLAR TYPE) W/O LOCK 1 FOR AUS
* 44 949-423 WASHER M4 (10 PCS.) 1 EXCEPT AUS,USA
* 45 990-082 SUPPORT (E) 1
* 45 981-986Z SUPPORT (A) 1 FOR AUS
46 305-634 HANDLE HOLDER (B) 1
47 949-426 WASHER M8 (10 PCS.) 2
48 305-632 LOCK NUT M8 (NYLON INSERT) 2
49 305-631 HANDLE (B) 1
50 301-653 TAPPING SCREW (W/FLANGE) D4X20 (BLACK) 2
51 305-624 HANDLE SHAFT 1
52 305-598 HOLDER (B) 2
53 305-623 HOLDER (A) 2
54 305-622 HANDLE DAMPER 8
55 305-633 SIDE HANDLE 1
56 305-625 HANDLE HOLDER (A) 1
57 NAME PLATE 1
58 992-851
SEAL LOCK HEX. SOCKET HD. BOLT M10X60
4
59 305-637 GEAR COVER ASS'Y 1 INCLUD.52
60 949-699 HEX. SOCKET HD. BOLT M4X20 (10 PCS.) 2
61 305-629 STOPPER 2
62 620-4VV BALL BEARING 6204VVCMPS2L 1
63 305-609 DISTANCE RING (A) 1
64 305-608 FINAL GEAR 1
65 305-607 DISTANCE RING (B) 1
66 996-433
SEAL LOCK HEX. SOCKET HD. BOLT M10X55
2
67 620-1VV BALL BEARING 6201VVCMPS2L 3
68 305-605 FIRST GEAR 1
69 305-604 SECOND GEAR 1
70 930-511 FEATHER KEY 4X4X10 1
71 991-690 SEAL LOCK HEX. SOCKET HD. BOLT M5X12 3
72 305-600 BEARING COVER (A) 1
73 620-3DD BALL BEARING 6203DDCMPS2L 1
74 992-841 BEARING WASHER 1
75 949-480 PIN D8X14 (10 PCS.) 1
76 305-599 INNER COVER 1
77 305-602 DISTANCE RING (C) 1
78 630-5VV BALL BEARING 6305VVCMPS2S 1
79 992-847 O-RING (A) 1
80 305-601 BEARING BOSS 1
81 305-603 SEAL LOCK HEX. SOCKET HD. BOLT M8X18 4
82 992-846 OIL SEAL 1
83 931-008 FEATHER KEY 4X4X12 2
84 305-606 CRANK SHAFT 1
85 305-596 HOUSING ASS'Y 1 INCLUD.52,93,94
86 980-717 O-RING (S-38) 1
87 990-945 OIL CAP ASS'Y 1 INCLUD.86
88 992-894 CAP RUBBER 2
89 878-356 SEAL LOCK HEX. SOCKET HD. BOLT M4X10 4
: ALTERNATIVE PARTS
*
2 --- 00