Hitachi H90SE, Technical Data And Service Manual

Page: 27 / 29

--- 25 ---
PARTS
H 90SE
: ALTERNATIVE PARTS
ITEM
NO.
CODE NO. DESCRIPTION
NO.
USED
REMARKS
1 318-650 RETAINER 1
2 994-416 ROLL PIN D6X55 2
3 318-651 LEVER PIN 1
4 306-373 NYLOCK HIGH TENSION BOLT M12X40 6
5 318-655 DAMPER (B) 2
6 305-621 RETAINER DAMPER 2
7 318-652 FRONT COVER 1
8 993-188 O-RING 1
9 877-316 O-RING (S-90) 1
10 318-653 SECOND HAMMER 1
11 992-865 O-RING (D) 1
12 956-503 O-RING (A) 1
13 318-654 HAMMER HOLDER 1
14 992-859 DAMPER 1
15 305-615 CYLINDER CASE 1
16 306-372 NYLOCK BOLT M10X45 4
17 949-445 WASHER M10 (10 PCS.) 4
18 993-195 O-RING 1
19 305-612 STRIKER 1
20 305-611 PISTON 1
21 305-614 PISTON PIN 1
22 878-716 O-RING (P-46) 1
23 305-613 CONNECTING ROD ASS'Y 1 INCLUD.24
24 956-485 NEEDLE BEARING (NSK RLM2220) 1
25 992-870 PIN 1
26 992-869 SWITCH LEVER 1
27 968-643 RETAINING RING (E-TYPE) FOR D4 SHAFT 1
28 993-496
SEAL LOCK HEX. SOCKET HD. BOLT M6X30
8
29 305-636 HANDLE (A) 1
* 30 500-390Z CORD 1 (CORD ARMOR D10.7)
* 30 500-246Z CORD 1 (CORD ARMOR D10.7) FOR GBR(110V)
* 30 500-408Z CORD 1 (CORD ARMOR D10.7) FOR AUS
* 30 500-450Z CORD 1 (CORD ARMOR D10.7) FOR GBR(230V)
* 30 500-391Z CORD 1 (CORD ARMOR D10.7) FOR SUI
* 30 500-453Z CORD 1 (CORD ARMOR D10.7) FOR USA
* 31 940-778 CORD ARMOR D10.7 1
* 31 958-049 CORD ARMOR D8.2 1
* 32 994-273 NOISE SUPPRESSOR 1 EXCEPT AUS,USA
* 33 930-153 SUPPORT (B) 1 EXCEPT AUS,USA
* 33 963-243 SUPPORT 1 FOR SUI
* 34 959-140 CONNECTOR 50091 (10 PCS.) 1 EXCEPT AUS,FIN,USA
* 35 959-141 CONNECTOR 50092 (10 PCS.) 1 EXCEPT AUS,FIN,USA
* 36 938-307 PILLAR TERMINAL 1 EXCEPT AUS
* 37 958-308Z PILLAR TERMINAL (A) 1 FOR FIN
38 996-438 VINYL TUBE (A) (I.D.7XT0.5X50) 2
* 39 981-974 INTERNAL WIRE 1 EXCEPT AUS,USA
* 39 306-681 INTERNAL WIRE 1 FOR GBR
* 40 992-810 TERMINAL 1 FOR CORD
* 40 930-804 TERMINAL M4.0 (10 PCS.) 1 FOR CORD FOR GBR(110V),USA
* 40 981-373 TUBE (D) 2 FOR CORD FOR AUS
* 41 960-266 CORD CLIP 1
*
2 --- 00