--- 13 ---
Fig. 14
Fig. 15
(6) Mount the cord clip as shown in Fig. 15 being careful of the direction.
The internal wire with tube of stator shall pass this groove.
Cord dia.: Over 8.5 mm dia.
The internal wire of stator
shall pass this area. (2 pcs.)
Cord clip mounting diag.
Cord dia.: Max. 8.5 mm dia.
8-3. Lubrication Points and Types of Lubricant
Pinion chamber of Gear Cover Ass'y [5] <5> ........................ ALVANIA grease EP (LF) O 35 g
Generously rub grease onto the gear and pinion
and inner circumference of metal.
8-4. Tightening Torque
Tapping Screws (W/Flange) D4 x 16
[42] <42> [46] <46> [45] <45> [52] <53> ...................................... 2.0 0.5 N•m (20 5 kgf•cm, 1.5 0.4 ft-lbs.)
Seal Lock Screws (W/SP. Washer) M5 x 14 [1] <1> ...................... 2.9 0.5 N•m (30 5 kgf•cm, 2.2 0.4 ft-lbs.)
Tapping Screw (W/Flange) D5 x 35 [2] <2> ................................... 3.4 0.7 N•m (35 7 kgf•cm, 2.5 0.5 ft-lbs.)
Hex. Socket Hd. Bolt (W/Flange) M5 x 16 [27] <27> ..................... 7.8 1.5 N•m (80 15 kgf•cm, 5.8 1.1 ft-lbs.)
Special Nut M10 [6] <6> ................................................................. 15.3 3.1 N•m (150 30 kgf•cm, 10.8 2.2 ft-lbs.)
Machine Screw M5 x 10 [20] <20> ................................................. 5.9 1.5 N•m (60 15 kgf•cm, 4.3 1.1 ft-lbs.)
Summary of Contents for G 18SH2
Page 35: ......
