manualshive.com logo in svg

Hitachi EP-M70E, Instruction Manual

Share
Download
Hitachi EP-M70E Instruction Manual Download Page 17

E-17

Install the water tank to the unit

5

CAUTION

CAUTION

 Wipe off water drops in the water tank holder (inner part) 

during installing the water tank.

 The water tank may be heavy when filled with water. Be 

careful not to injure your fingers, nails, or your back 
while handling.

 Securely install the tank, making sure that it is pressed 

until the back of the unit.

If it is not securely installed, it may cause water leakage 
during operation.
Also, hold down the unit to make sure that the unit will not 
move during installation.

Water le

vel

Water level

4

CAUTION

Water tank

Tank cover

 Fill the water tank, making sure that it does not 

exceed the line.

 Wipe the moisture around the water tank.

 When filling the water tank away from the unit, attach 

the tank cover and hold it in place.

Put water in the water tank and place 
the tank cover.

 If the water exceeds the fill line of the water supply, it 

may cause water leakage.

 Securely attach the tank cover.

If it is not securely attached, it may cause water leakage 
during operation.

Make sure that the water 
does not exceed the line.

Water tank holder

Water tank

 Pr
eparations for Operation

EP-M70E_EN.indd   17

EP-M70E_EN.indd   17

2017/2/23   17:27:42

2017/2/23   17:27:42

Summary of Contents for EP-M70E













































Reviews:

No comments

Brands by name

Popular brands

Load more brands