Hitachi EC702MP-BB3, Operation Manual

Page: 23 / 108

23 | 108
E-Compact MP-BB3 Series
Electrical Features
Power Requirement⁴
(specify configuration at equipment purchase
order)
EC702MP-BB3
Single-Phase (M110)
Single-Phase (M220)
Biphasic (B220)
EC704MP-BB3
Single-Phase (M110) for two-PSU
Single-Phase (M220)
Biphasic (B220)
AC Power
For use one or two PSU, see Section 3, topic 3.2.2. PSU
Redundancy, AC mains, RF Output Power (TPO)
EC702MP-BB3
100~253VAC (one PSU)
EC704MP-BB3
100~253VAC (two PSU)
187~253VAC (two PSU)
AC mains Frequency
47 to 63Hz
Power Factor Correction 0.97/230VAC at full load
Typical Consumption⁵
ATSC 3.0
ATSC 1.0
EC702MP-BB3
887 W
990W
EC704MP-BB3
1556 W
1750 W
Typical Thermal Dissipation⁵
ATSC 3.0
ATSC 1.0
EC702MP-BB3
2309 BTU/h
2524 BTU/h
EC704MP-BB3
3874 BTU/h
4263 BTU/h
Interfaces
Monitor /
Control Interface Web GUI and SNMP:
Ethernet¹ via RJ-45
Communication Interfaces Ethernet¹ / SNMP
Format Ethernet¹ (IEEE 802.3u) 10Base-T/100Base-TX
Mechanical Features
Equipment Weight:
Cabinet 19” 10U mounting
EC702MP-BB3
64 Kg
(141.0 lb)
EC704MP-BB3
65 Kg
(143.3 lb)
Dimensions
(Cabinet 19” 10U mounting):
Width:
Length:
Height:
600 mm (23.62 in)
900 mm (35.43 in)
550 mm (21.65 in)
Environment Features
Operation altitude up to 8200ft² ASL³
Environment temperature range +32°F to +113ºF (+77°F recommended)
0ºC to +45ºC (+25°C recommended)
Environment humidity range 0 to 95% (non-condensing)
Power Amplifier Cooling Forced ambient air, front to back flow using
integral high volume fans