Host attachment tasks include configuring ports and preparing the host hardware and
software for connection to the storage system. For information and instructions, see the
host attachment preparation procedures in the Open-Systems Host Attachment Guide. You
will also find the following resources helpful:
■
For the latest interoperability and compatibility information about supported hosts
and host attachment hardware, see the Hitachi Vantara
■
For information about preparing your hosts for use with the storage system, see the
documentation for the product.
Cabling Fibre Channel ports
Important: For important information and instructions about connecting to
hosts, refer to the Open-Systems Host Attachment Guide.
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. Connect the Fibre Channel data ports on each storage system controller to your
Fibre Channel switch.
2. Connect your Fibre Channel switch to the Fibre Channel HBA card in each host
computer or server.
Cabling iSCSI ports
Each controller supports 10-gigabit Ethernet copper (RJ-45) or optical (fiber) iSCSI
connectivity to your data network.
Important: For important information and instructions about connecting to
hosts, refer to the Open-Systems Host Attachment Guide.
Cabling Fibre Channel ports
Installing your VSP E590 and VSP E790 storage system
Hitachi Virtual Storage System E590, E790 Installation Guide
21