Use NTP Server
Determines whether the storage
system time is synchronized with an
NTP server.
■
Yes: Synchronize system time with
an NTP server. Enter the IP address
or domain name of the NTP server.
To add more than three servers, click
the + Add NTP Server button. To
synchronize the system time to the
NTP server time now, check
Synchronize immediately.
■
No: Do not synchronize system time
with an NTP server. In Date & Time,
enter the date and time that the
storage system will use.
Synchronizing Time
To synchronize the storage system time
with the NTP server at a specific time,
enter the time when the two will be
synchronized.
13. Confirm or change the network settings that you entered earlier in this procedure,
and then click Apply.
14. When prompted that initial settings are complete, click Close.
Running the Initial Setup wizard
Installing your VSP E590 and VSP E790 storage system
Hitachi Virtual Storage System E590, E790 Installation Guide
19