12
English
OIL SENSOR
●
The oil sensor detects the fall in oil in the crankcase and automatically stops the engine when the oil level
fails down below the safety limit.
●
When engine has stopped automatically, check the oil level.
●
If the engine does not start by usual starting procedures, check the oil level.
●
Run
RECOMMENDED OIL LEVEL
OIL LEVEL
FLOAT SWITCH
OFF
Fig. 27
●
Stop
Oil Level
OIL LEVEL
ON
Fig. 28
STOPPING THE GENERATOR
1. Turn off the power switch of the electric equipment or unplug the cord from
receptacle of the generator.
2. Allow the engine about 3 minutes to cool down at no-load before stopping.
3. Set the engine switch to “OFF/
䡬
” position.
4. Close (“CLOSE”/ “C”) the fuel cock.
Fig. 22
Fig. 23
Fig. 24
Fig. 26
Fig. 25
E24SC
E42SC, E62SC
E24SC
E42SC, E62SC
CLOSE
CLOSE
CLOSE
CLOSE
