149
E
ngli
s
h
QR34653
Card has no data.
This message will appear when the
button is pressed with a
card inserted on which no still is recorded. (It will appear if you
attempt playback or editing on Disc Navigation, but will not appear
if you press
on camera through image.)
Card is not formatted.
Format the card now?
Was the card formatted on PC? When using the card on this DVD
video camera/recorder, choose “YES” and format it.
125
Control Information
Error.
Mismatch may occur between the recorded image and scene
information.
Update the control information.
126
•
Use another disc.
•
See *3 on page 153.
23, 75
DISC ACCESS
The recorded scene is being stored on disc.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
51, 54
This DVD video camera/recorder is verifying whether the correct
disc has been inserted.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
This message will be displayed for a little longer when the date
changes.
DISC ALMOST FULL
The disc will soon be full, and recording will be impossible.
Delete unnecessary scenes and try the disc again, or use another
disc.
27, 28, 99
Disc error has occurred.
Finalising is not
complete.
•
Disc error occurred during finalising, and finalising failed.
Replace the disc.
•
See *3 on 153
127
Disc error has occurred.
Format the disc now?
•
Has the disc been initialised on PC? Has initialising the disc on
PC been interrupted?
Choose “YES” and initialise the disc when using it on this DVD
video camera/recorder. initialising the disc will erase all data on it.
•
See *2 on page 153.
125
Disc error has occurred.
Formatting is not
complete.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. before reusing
it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
75, 125
Disc error has occurred.
Keep disc inside &
restart.
Disc error could have occurred during editing of scenes.
Turn off the DVD video camera/recorder with the disc being used in
it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
41
Disc error.
•
Use another disc.
•
See *3 on page 153.
23, 75
•
Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/recorder.
initialise the disc or use another disc.
•
initialising the disc will erase all data on it.
125
Message
Cause & Troubleshooting
Reference
page
