81
E
ngli
s
h
USING THE ELECTRONIC IMAGE STABILIZER (EIS)
This DVD video camera/recorder is equipped with an electronic image stabilizer function: When you use
zoom to record a magnified subject image, it will correct fuzziness in the recorded image.
1
Press the MENU button,
choose “EIS” on the
“Camera Functions
Setup” menu screen, and
then press the
button.
2
Choose the “On” or “Off”, and then press the
button.
3
Press the MENU button to end the setting.
●
Checking EIS On or Off
You can check EIS On or Off by the on-screen
information display.
After recording with EIS set to “Off”, it is
recommended that you return the setting to “On”
and then turn the DVD video camera/recorder off,
unless you normally record with “Off” setting.
This function is effective only during movie
recording: It will not work during still recording.
Note
:
•
The EIS setting will be stored in memory even when the
DVD video camera/recorder is turned off.
•
Although you can switch EIS between on and off during
still recording, the setting will be effective only during
movie recording.
•
It is recommended that you specify “EIS Off” when using
the DVD video camera/recorder on a desk or tripod.
•
When “EIS On” is specified, there will be a slight
difference between the actual movement and the
movement on screen.
•
Gross camera shake may not be entirely corrected even
if “EIS On” is specified.
•
EIS may not operate correctly when a tele or wide-
conversion lens is used.
Came r a F u n c t i on s S e t u p
P r o g r am AE
Wh i t e Ba l .
D i g . Z o om
E I S
O f f
On
ENTER
RETURN
RAM
M I C . F i l t e r
1 6 : 9
3 0 MIN
0 : 0 0 : 0 0
REM
FINE
1 7 : 0 0
3 0 / 9 / 2 0 0 3
EIS
