57
123
JUMPING TO SPECIFIED POINT (GO TO)
1
Press the MENU button
during playback.
2
Choose the option
(point you want to go
to), and then press the
A
button.
Top:
To go to the start, and enter playback pause.
End:
To go to the end of last scene, and enter
playback pause.
Specify:
To go to a specified point and enter playback
pause. See the following for details.
●
Specifying the point to view
1
Choose “Specify” in step 2 above, and then
press the
A
button.
The screen for specifying the point to go to
will appear.
2
Use the
f
/
e
/
d
/
c
buttons to select
the desired time of chosen point.
3
Press the
A
button to enter the selection.
The DVD video camera/recorder will go to
the specified point and enter the playback
pause status.
Pressing
A
again will start playback.
To cancel the “Go To” procedure midway, press
the
C
button before going to the specified point.
Note
:
•
If multiple scenes are selected using the Disc
Navigation function or SELECT button, choosing
“Top” will jump to the beginning of selected scenes
(p. 120).
•
When multiple scenes are selected, the total time of
selected scenes will appear in the “total recording
time” display.
•
With card, the number of stills will appear at the
“TOP”, “CURRENT”, “END” and “GO TO” indicators.
•
The cursor may not move at same-pitch intervals.
Go T o
RAM
ENTER
RETURN
En d
S p e c i f y
To p
Press
f
: To select the start.
Press
e
: To select the end.
Press
d
or
c
:
•
Press once:
To move the cursor in 10-second units
(1-still units for card)
•
Hold down:
To move the cursor in 1-minute units
(10-still units for card)
GO TO
0 : 00 : 00
0 : 24 : 24
0 : 03 : 26
0 : 03 : 26
TOP
END
CURRENT
TOP
END
ENTER
CANCEL
Go t o
Position of currently
played back image
Total recording time of
all selected scenes
Cursor
Cursor position
GO TO
0 : 00 : 00
0 : 24 : 24
0 : 03 : 26
0 : 00 : 00
TOP
END
CURRENT
TOP
END
ENTER
CANCEL
Go t o
(When the start of scene is selected)
Cursor at current image position.
Cursor at (GO TO) position.
