Hitachi DZ-HS401, Instruction Manual

Page: 144 / 163

144
Card error has
occurred. • The card terminals may be dirty: Wipe off dirt, and try the card
again, or use another card.
• Data other than still image may be included: Use another card.
27
Card error has
occurred.
Format the card now? Was the card formatted on PC? Was formatting interrupted
midway? When using the card on this DVD video camera/
recorder, choose “YES” and format it.
109
Card error has
occurred.
Formatting is not
complete. The card may be damaged: Use another card.
27
Card error has
occurred. Keep card
inside & restart. Card error could have occurred during editing of scenes. Turn off
the DVD video camera/recorder with the card being used inside,
connect the AC adapter/charger, and then power the DVD video
camera/recorder again.
28, 33
Card full. Delete unnecessary stills and try the card, or use another card. 89, 160
Card is not formatted.
Format the card now? Was the card formatted on PC? When using the card on this DVD
video camera/recorder, choose “YES” and format it.
109
CHECK CARD The inserted card cannot be used in this DVD video camera/
recorder: Use another card.
27
CHECK DVD A disc unusable on this DVD video camera/recorder may have
been inserted or the disc may be damaged.
Make sure that the type of disc is correct, and make sure that the
disc is not write-protected.
27, 110
CHECK HDD The HDD may have been destroyed. Also check to see whether
the HDD is write-protected.
110
Control Information
Error. Mismatch may occur between the recorded image and scene
information.
Update the control information.
111
• Use another disc.
• See *3 and *4 on page 148.
—
COPY PROTECTED The video signal input to this DVD video camera/recorder may be
copy-guarded.
Some prerecorded video materials, such as movies, are guarded
against copying.
Copy-guarded materials cannot be recorded on this DVD video
camera/recorder.
120
Dubbing is not
complete. This message will appear when dubbing has failed.
84, 88
DVD error has occurred.
Finalizing is not
complete. • Disc error occurred during finalizing, and finalizing failed.
Replace the disc.
• See *3 on page 148.
112
DVD error has occurred.
Format the DVD now? • Has the disc been initialized on PC? Has initializing the disc on
PC been interrupted?
Choose “YES” and initialize the disc when using it on this DVD
video camera/recorder. Initializing the disc will erase all data on
it.
• See *2 on page 148.
109
DVD error has occurred.
Formatting is not
complete. The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. before
reusing it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
11, 109
Message Cause & Troubleshooting
Reference
page