Hitachi DZ-BX35E Instruction Manual Download

Page: 130 / 157

English

130

Subsidiary Information

Introduction to Optional Accessories

CAMERA ACCESSORIES

Video flash (DZ-FLH3)*

Wide conversion lens (DZ-WL1)*

Tele-conversion lens (DZ-TL1)*

Step-up ring (DZ-SR3437 for DZ-GX3200E/BX37E/BX35E, DZ-SR3037 for DZ-GX3100E)

POWER SUPPLY

Battery (DZ-BP7SW)*
Battery (DZ-BP14SW)

• When using camera accessories, be sure to read the instruction manuals for each accessory.

Unavailable for DZ-GX3100E/BX37E/BX35E.

You will need the optional step-up ring when attaching these lenses to the DZ-GX3200E/GX3100E/BX35E.
With the DZ-GX3200E/BX37E/BX35E, be sure to remove the lens hood at the front of lens before attaching the
lens.

* Unavailable for DZ-GX3300E/GX3200E.

• Refer to the catalogue for details.Refer to the catalogue for details.

• The models and specifications of the optional accessories shown on this page are subject to change, and their

production may be discontinued.

Summary of Contents for DZ-BX35E






























































































































































Search results

Summary of Contents for DZ-BX35E

Reviews:

Related manuals for DZ-BX35E

Brands by name

Popular brands

Hitachi DZ-BX35E, Instruction Manual

Search results

Summary of Contents for DZ-BX35E

Reviews:

Related manuals for DZ-BX35E

Brands by name

Popular brands