
– 17 –
EN
2C15
Skip This Section When Connected By SCART.
Video channel setting will be necessary, if your
DVD/VCR is connected to the TV via the aerial cable.
• Use the remote control for this procedure.
1
Insert a pre-recorded tape into the
DVD/VCR.
• The DVD/VCR will turn on and start playback
automatically.
If playback does not start, press PLAY (
B
)
.
2
Select and adjust your TV to channel 35.
• If the playback picture appears on the TV screen,
continue with step 8.
• If channel 35 is employed for broadcasting, or
interference lines appear on the picture, the RF
converter must be set to a different channel
between CH22 and CH69. Continue with step 3.
3
Press MENU.
4
Press Arrow (
o
/
p
) repeatedly to select
“INITIAL”. Then, press Arrow (
B
).
5
Press Arrow (
o
/
p
) repeatedly to select “RF
OUT”. Then, press Arrow (
B
).
• The RF OUT CH menu will appear.
6
Press Arrow (
o
/
p
) to select a channel
which is not used for broadcasts between
channel 22 and channel 69 in your area, then
press Arrow (
B
).
7
Press MENU to exit.
• Set the TV channel to the RF OUT CHANNEL
which was selected on the DVD/VCR. Then, press
PLAY (
B
)
. A picture from the DVD/VCR will
appear on the TV screen. If a picture does not
appear, repeat steps 3 to 7 using a different channel
which is not used for broadcasts.
VCR
PRESET FOR USE
VIDEO CHANNEL SETTING
8
Press STOP (
C
) to stop the tape.
Notes
• You may also access the RF OUT CH menu by
pressing and holding MENU on the remote control
for 3 seconds during power off until the RF OUT
CH menu appears.
• If your DVD/VCR and TV are connected using a
SCART cable there is no need to have the RF con-
verter operating so it can be switched off and avoid
the possibility of interference. To switch off the RF
converter, follow the instructions for Video Channel
Setting to step 6 then select channel 22 first and
then press Arrow (
o
/
p
) so that “--” appears next to
“RF OUT CH” on the TV screen and finally press
MENU to finish.
MENU
TIMER
SET UP
INITIAL
RF OUT CH 35
INITIAL
CH TUNING
CLOCK
RF OUT
H9551BD.qxd 03.5.20 3:12 PM Page 17