Hitachi DVPF2E, Service Manual

Page: 35 / 112

E2-1-1
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
Note:
(1): Identification (location) No. of parts in the figures
(2): Name of the part
(3): Figure Number for reference
(4): Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P=Spring, L=Locking Tab, S=Screw,
CN=Connector, W=Washer
*=Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5): Refer to “Reference Notes.”
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
Note
[1] Top Cover D1 8(S-1) -
[2]
Front
Assembly
D2
(S-1A), *CN505,
*2(L-1), Tray Panel,
*7(L-2)
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
[3]
Top
Bracket
D2 4(S-2) -
[4] Jack CBA D3 3(S-3) -
[5]
DVD
Mecha
Assembly
D4
3(S-4), *CN501,
*CN701
-
[1] Top Cover
[8] VCR Chasis
Unit
[6] DVD Main
CBA Unit
[5] DVD Mecha
Assembly
[2] Front
Assembly
[9] Deck
Assembly
[4] Jack CBA
[3] Top Bracket
[7] Rear Panel
[10] Main CBA
[13] Power
Supply CBA
[17] Insulator
[15] Deck
Pedestal-2
[14] Deck
Pedestal-1
[11] Function
CBA
[16] Side
Bracket
[12] AFV CBA
[6]
DVD Main
CBA Unit
D5
3(S-5), *CN101,
*CN401
2
2-1
2-2
2-3
3
[7]
Rear
Panel
D6 3(S-6), 3(S-7) -
[8]
VCR
Chassis
Unit
D7
*CN001, *CN002,
5(S-8), 5(S-9)
-
[9]
Deck
Assembly
D8 Desolder, 2(S-10) 4,5
[10] Main CBA D8 ---------- -
[11]
Function
CBA
D8 Desolder, *CN2002 -
[12] AFV CBA D8 Desolder -
[13]
Power
Supply
CBA
D9
3(S-11), Bracket,
*(L-3)
-
[14]
Deck
Pedestal-1
D9 6(S-12), 3(W-1) -
[15]
Deck
Pedestal-2
D9 (S-13) -
[16]
Side
Bracket
D9 (S-14) -
[17] Insulator D9 ---------- -
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
Note
CHAPTER 2 DISASSEMBLY AND ADJUSTMENT