Hitachi DVPF2E, Service Manual

Page: 18 / 112

E1-6-8
gramme (For example: setting clock or timer pro-
gramme).
44. F (
PAUSE/STILL
)
Button
●
DVD mode
Press to pause Disc playback. Press repeatedly to
advance the DVD picture step by step (or one
frame at a time).
●
VCR mode
While recording, press to temporarily stop the
recording (pause). Press a second time to resume
normal recording. You can not pause a One Touch
Recording. Or, press during tape playback to
freeze the picture. Press to advance the picture one
frame at a time during still mode.
45.
g
(ENTER/FWD/F.FWD) Button
●
DVD mode
Press to fast forward the Disc. Press the
F
Button,
then press this Button to begin slow motion play-
back. Press this Button repeatedly to change the
forward speed of slow motion.
●
VCR mode
Press to rapidly advance the tape, or view the pic-
ture rapidly in forward during playback (Forward
Search). When setting programme (For example:
setting clock or timer programme), press to deter-
mine your selection and proceed to the next step
you want to input. Press to determine the setting
modes from the on screen menu. Press to add or
delete channel numbers during channel preset.
46.
B
(MENU SELECT/PLAY) Button
●
DVD mode
Press to begin playback.
●
VCR mode
Press to begin playback. Press to enter digits when
setting programme (For example: setting clock or
timer programme). Press to select the setting
modes from the on screen menu.
47.
CH Buttons (
L
/
K
) (VCR)
In VCR mode, press to change TV channels on the
DVD/VCR; press to adjust the tracking during nor-
mal or slow motion playback; press to remove verti-
cal jitter in a Still picture.
48.
REC Button (VCR)
Press once to start a recording.
49.
SPEED Button (VCR)
Press to select the VCR’s recording speed (SP or LP).
50.
VCR Button
Press to select VCR mode for the remote control.
●
You can switch the output mode of the DVD/VCR
either by pressing the OUTPUT Button on the
front panel, or by pressing the DVD or the VCR
Button on the remote control. However, pressing
only the OUTPUT Button on the front panel
does not switch the output mode of the remote
control. If you want to use the remote control,
you always need to select the correct output
mode on the remote control, too.
51.
SETUP Button
Press to enter the setup mode.
52.
SUBTITLE Button
Press to select the desired subtitle language.
53.
TOP MENU/VIDEO Plus+ Button
●
DVD mode
Press to bring up the Top Menu on a disc.
●
VCR mode
Press to programme timer recording with the
VIDEO Plus+ system.
54.
DISPLAY Button
●
DVD mode
Press to access or remove the display screen during
DVD or Audio CD playback.
●
VCR mode
Press to access or remove the VCR’s on-screen sta-
tus display.
55.
AUDIO Button
●
DVD mode
Press to select a desired audio language or sound
mode.
●
VCR mode
Press to select a desired sound mode.
56. Number Buttons
●
DVD mode
Press to directly select a Track (Audio CD) for
playback.
Press to programme Tracks (Audio CD) for play-
back.
+10 Button:
When searching a TITLE, a CHAPTER, or a
TRACK, use this button to enter numbers 10 and
above. For example when entering ‘15’, press this
button first, then press ‘5’.
●
VCR mode
Press to select TV channels on the DVD/VCR.
To select channels, enter channel numbers as a
two-digit number for the quickest results. For
example, to select channel 6, press 0 then 6.
DAILY/WEEKLY Button:
Press to select once, daily, everyday, or weekly
when you programme the automatic timer record-
ing using the VIDEO Plus+ system.
57.
OPEN/CLOSE Button (
A
)
Press to insert discs into or remove them from the tray.
58.
SEARCH MODE/QUICK-FIND Button
●
DVD mode
Press to access or remove the Search display,
which allows you to go directly to a specific
Title/Chapter/Track/Time.
●
VCR mode
Press to use Quick-Find mode.