Pla
y
able Disc / Suppor
tiv
e
F
o
rmats / Pla
yback F
unc
tions
Saf
e
ty
W
a
rnings
and
Table of C
o
nt
ents
P
roduc
t O
v
er
view
s
C
onnec
tions
S
y
st
em S
e
t-up
T
roubleshooting
and Specification
GB-2
Safety Warnings
Read all the instructions carefully
t
before using the unit and keep them
for future reference.
Retain the manual. If you pass the
t
unit onto a third party make sure to
include this manual.
Check that the voltage marked on
t
the rating label matches your mains
voltage.
Damage
Please inspect the unit for damage
t
after unpacking.
Do not continue to operate the unit if
t
you are in any doubt about it working
normally, or if it is damaged in any
way - switch off, withdraw the mains
plug and consult your dealer.
Location of Unit
The unit must be placed on a flat
t
stable surface and not subjected to
vibrations.
Do not place the unit on sloped or
t
unstable surfaces as the unit may fall
off or tip over.
The mains socket must be located
t
near the unit and should be easily
accessible.
This unit is designed for indoor use
t
only.
Temperature
Avoid extreme degrees of
t
temperature, either hot or cold. Place
the unit well away from heat sources
such as radiators or gas/electric fires.
Avoid exposure to direct sunlight and
t
other sources of heat.
Naked Flames
Never place any type of candle or
t
naked flame on the top of or near the
unit.
Moisture
To reduce the risk of fire, electric shock
t
or product damage, do not expose
this unit to rain, moisture, dripping
or splashing. No objects filled with
liquids, such as vases, should be
placed on the unit.
If any liquid is split into the unit it can
t
cause serious damage.
If you spill any liquid into the unit,
t
switch it off at the mains immediately.
Withdraw the mains plug and consult
your dealer.
Ventilation
To prevent the risk of electric shock or
t
fire hazard due to overheating, ensure
that curtains and other materials do
not obstruct the ventilation vents.
Do not install or place this unit in
t
a bookcase, built-in cabinet or in
another confined space. Ensure the
unit is well ventilated.
Safety
Always disconnect the unit from the
t
mains supply before connecting/
disconnecting other devices or
moving the unit.
Unplug the unit from the mains socket
t
during a lightning storm.
Mains Cable
Make sure the unit or unit stand is not
t
resting on top of the mains cable, as
the weight of the unit may damage
the mains cable and create a safety
hazard.
If the mains cable is damaged it must
t
be replaced by the manufacturer, its
service agent, or similarly qualified
persons in order to avoid a hazard.
Interference
Do not place the unit on or near
t
appliances which may cause
electromagnetic interference. If you
do, it may adversely affect the working
of the unit, and cause a distorted
picture or sound.
