Hitachi DV-RX5000U Operating Instructions Manual Download | Manualshive

Page: 53 / 62

background image

53

Re

fe

re

nce

Sound

Page

Play

Displays

Remote control

No sound.
Low volume.
Distorted sound.

≥

Check the connections. Check the input mode on the amplifier if you have connected one.

≥

Turn V.S.S. off if it causes distortion.

5,

41–43

37

Cannot hear the desired
audio type.

≥

Press [AUDIO] to select the desired audio type.

23

Cannot switch audio during
stereo or SAP broadcasts.

≥

You have used digital connection. Set “Dolby Digital” to “PCM” or connect to other equipment
using audio cables (analog connection).

≥

You cannot change the audio type when a DVD-R is in the disc tray.

42, 47

—

Play fails to start even when
[

1

] (PLAY) is pressed.

Play starts but then stops
immediately.

≥

Insert the disc correctly with the label facing up.

≥

This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Video, Video CD, CD and
MP3 discs.

≥

The disc is dirty. Clean it.

≥

The disc may be badly scratched.

≥

You inserted a blank DVD-RAM or DVD-R.

≥

Condensation has formed: Wait 1 to 2 hours for it to evaporate.

15
11

50

—
—
—

A title or chapter doesn’t play
when it is selected.

≥

Some titles and chapters on DVD-Video are not played when you have changed the ratings
level.

46

Picture distorted during
search.

≥

Some distortion is normal.

—

Alternative soundtrack and
subtitles cannot be selected.

≥

The languages are not recorded on the disc.

≥

You may have to use the disc’s menus to select languages.

—

17

No subtitles.

≥

Subtitles are not recorded on the disc.

≥

Turn the subtitles on.

—

36

Angle cannot be changed.

≥

This function depends on software availability. Angles can only be changed during scenes
where different angles are recorded.

—

You have forgotten your rat-
ings password.

≥

Return the ratings setting to “8”.
While the disc tray is open, press and hold [

:

/

6

] and [

5

/

9

] on the main unit at the

same time for 5 or more seconds.

—

The display is dim.

≥

Go to the Display menu and change the display’s brightness with “FL Display”.

47

“12:00” is flashing on the
unit’s display.

≥

The clock is not set.

49

The displayed recording time
and actual recording time dif-
fer.

≥

Displayed recording time is based on the number of frames per second. This number is sub-
ject to minute variations. When recording over long periods, these variations may result in the
difference between displayed recording time and actual recording time. This is normal.

—

The display doesn’t show the
correct time.

[MP3]

≥

Times may not appear correctly when searching through tracks recorded with a variable bit
rate.

—

The remote control doesn’t
work.

≥

[DVD, TV] is not switched to “DVD”. Switch to “DVD” when operating this unit.

≥

The remote control and main unit are using different codes. Change the code on the remote
control or main unit.

≥

The batteries are depleted. Replace them with new ones.

≥

Point the remote control at the remote control sensor on the main unit.

≥

Remove obstacles from between the remote control and main unit.

12
45

6
6

—

Cannot operate the televi-
sion.

≥

Change manufacturer code. Some televisions cannot be operated even if you change the
code.

≥

[DVD, TV] is not switched to “TV”. Switch to “TV” when selecting the receiving channel for the
television.

10

12

«
...
51
52
53
54
55
...
»

Summary of Contents for DV-RX5000U































































Reviews:

No comments

Related manuals for DV-RX5000U

Writemaster SH-S183A

Brand: Samsung Pages: 2

DIGA DMR-XS350EB

Brand: Panasonic Pages: 117

Brand: Panasonic Pages: 124

DIGA DMR-XS350EB

Brand: Panasonic Pages: 140

Brand: Abus Pages: 40

Brand: Abus Pages: 61

Brand: 1001Espions Pages: 49

Brand: Fostex Pages: 92

Brand: WINYCAM Pages: 42

Brand: Uniden Pages: 24

Brand: Velleman Pages: 41

Brand: Panasonic Pages: 97

Brand: RCA Victor Pages: 19

Brand: Panasonic Pages: 2

Brand: Pyle Pages: 4

Brand: Olympus Pages: 171

Brand: Olympus Pages: 44

Brand: Olympus Pages: 180

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands