Hitachi DS225, Hardware Manual

Page: 16 / 31

A
BOUT THE
S
YSTEM
S
YSTEM
F
EATURES
1-4
SKU3/Front Storage/
Back Expansion Slots
SKU3 O
PTION
4
Front Storage
(4) 3.5"/2.5" SATA + (4) NVMe x4 – Front BP
Back Expansion Slots
[CPU0]
 (1) OCP Mezz x16 (can switch to PCH if not using OCP mezz)
 (2) GPU x16 (from Riser slot 1B or slot 4)
[CPU1]
 (2) GPU x16 or (2) FHHL x16 (from Riser slot 2 or slot 3)
 (2) NVMe x4 SSD (form Riser slot 3)
 (2) NVMe x4 SSD (form Riser slot 2)
Onboard storage (1) SATADOM (optional)
Video Integrated Aspeed AST2500 with 8MB DDR4 video memory
Network options
 (1) GbE quad port OCP mezzanine card or PHY card (Optional)*
 (1) 10 GbE quad port OCP mezzanine card or PHY card (Optional)*
 More options refer to the AVL at support.HitachiVantara.com
*The quad port PHY card is Installed to OCP mezzanine slot
Front I/O
 Power/ID/Reset Buttons
 Power/ID/Status LEDs
 (2) USB ports
 (1) VGA port (Display Priority: First; one device one time)
Back I/O
 (2) USB 3.0 ports
 (1) VGA port (Display Priority: Second; one device one time)
 (1) RS232 serial port
 (1) GbE RJ45 management port
 (1) ID LED
 (1) MicroSD slot
TPM Yes (optional, SPI mode)
ACPI ACPI compliance, S0, S5 support
Power supply
(2) 1600W/2200W 86mm Platinum redundant PSUs, AC/ HVDC support
 1600W (Lite-on/PS-2162-1Q): 200-240Vac, 50/60Hz, 10A or 240Vdc 10A
 1600W (Acbel/FSE023): 200-240Vac, 50/60Hz, 10A or 240Vdc 8A
 2200W (Artesyn/MC2200B4-3-4R-02):100-120*/200-240Vac, 50/60Hz,
15.5A/14A (*Output will be 1200W while the input voltage is 100-120Vac)
System Rating
 200-240Vac, 50/60Hz, 10A or 240Vdc, 8A (each PSU Inlet)
 100-120/200-240Vac, 50/60Hz, 10A or 240Vdc, 8A (each PSU Inlet)
Fan
(6) dual-rotor fans*
*The system performance might be affected while a fan fault occurred.
System management IPMI v2.0 Compliant, on board "KVM over IP" support
Table 1: System Specifications (Continued)
S
PECIFICATIONS
D
ESCRIPTION