--- 22 ---
(c) With the ridge at the Click Spring
[5] <5>
facing the front-side, insert Click Spring
[5] <5>
into the recess of
the Front Case
[9] <9>
. (See Fig. 8.)
(d) Insert the Clutch Dial
[4] <4>
to the Front Case
[9] <9>
. (See Fig. 9.)
Mount the Nut
[6] <6>
into the Clutch Dial
[4] <4>
engaging the wider projection of the Nut
[6] <6>
with the
wider recess of the Clutch Dial
[4] <4>
. (The wider recess of the Clutch Dial
[4] <4>
is positioned at "5"
when viewed from the outside.) Make sure that the hook of Front Case
[9] <9>
is fitted into the hole in the
Clutch Dial
[4] <4>
.
(3) Reassembly of the gear unit
(a) Apply grease (Hitachi Motor Grease No. 29, Code No. 930035) to the meshing parts of the gear.
(b) Install the parts series from the six Steel Balls D5
[10] <10>
to Washer (B)
[23] <23>
into the assembly
reassembled in step (2). (See Fig. 10.)
Fig. 8
Fig. 9
Fig. 10
[17] <17>
[20] <20>
[19] <19>
[18] <18>
[14] <14>
[13] <13>
[12] <12>
[11] <11>
[10] <10>
[23] <23>
[21] <21>
[22] <22>
[16] <16>
[15] <15>
Groove
