Hitachi DS 12DVF2, Technical Data And Service Manual

Page: 16 / 41

--- 13 ---
(7) Do not insert foreign objects into the air vents on the Charger
The Charger case is equipped with air vents to protect the internal electronic components from overheating.
Caution the customer not to allow foreign materials, such as metallic or flammable objects, to be dropped or
inserted into the air vents. This could cause electrical shock, fire, or other serious hazards.
(8) Do not attempt to disassemble the Storage Battery or the Charger.
Special devices, such as a thermostat, are built into the storage battery and charger to permit rapid charging.
Incorrect parts replacement and/or wiring will cause malfunctions which could result in fire or other hazards.
Instruct the customer to bring these units to an authorized service center in the event repair or replacement is
necessary.
(9) Disposal of the Storage Batteries (Types EB 1414, EB 1414S, EB 1214L, EB 1214S, EB 914 and EB 914S)
Ensure that all customers understand that Types EB 1414, EB 1414S, EB 1214L, EB 1214S, EB 914 and
EB 914S Storage Batteries should be returned to the Hitachi power tool sales outlet or the authorized service
center when they are no longer capable of being recharged or repaired. If thrown into a fire, the batteries may
explode, or, if discarded indiscriminately, leakage of the cadmium compound contained in the battery may
cause environmental pollution.
B. Caution Plate
The following cautions are listed on the Name Plate attached to each of Types EB 1414, EB 1414S, EB 1214L,
EB 1214S, EB 914 and EB 914S Storage Batteries.
For Europe